665364

Hotpoint SIDC30BA1 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
1212
en
Cleaning (J)
Never use aggressive and/or abrasive
substances to clean the plastic parts and
the iron soleplate.
1. Set the steam regulator (3) to Off, disconnect the
appliance plug from the electrical socket and let
the iron cool down.
2. Use a dry or slightly dampened soft cloth to
clean the upper part of the iron.
3. For the ordinary cleaning and/or removal of
stains or other residues deposited on the plate,
clean with a dampened soft cloth and dry.
4. Use a dampened cotton tip to eliminate scale in
the steam holes that may impair the performance
of your iron.
In order to keep the soleplate perfectly
smooth and polished, avoid contacts with
metal objects, do not iron sharp objects, such as
buttons, studs and hinges in order to avoid
scratching the plate.
5. Regularly rinse the reservoir with clean water.
After cleaning, always empty the water reservoir.
Auto-Clean Function (K
1
)
LCD
If you have been using water from the tap, we
recommend starting the Auto-Clean function after
ironing every time.
The use of the Auto-Clean function should
not be deemed the same as using deminera-
lised water on a regular basis.
1. Check that the appliance is disconnected from
the electrical socket and the steam regulator is
(3) set to Off.
2. Fill the water reservoir (9) up to the maximum
water level (10).
Never add any perfume, vinegar, starch,
scale-removing agents, ironing products or
other chemicals in the water reservoir - unless
recommended by Hotpoint. Never use
contaminated water.
3. Connect the plug of the appliance into a
grounded socket (220/240V).
4. Set the temperature to the maximum value with
the temperature buttons +/- (4a).
5. Wait at least 2 or 3 minutes to warm the iron
completely.
6. Holding the iron above the sink or a container
made of resistant material, press the Auto-Clean
button (8) and shake gently.
Steam and boiling water will come out of the
soleplate with scale residues and other
impurities. Never use plastic containers for
collection.
7. Switch off the iron and disconnect it from the
electrical socket.
8. Set the steam select to the maximum position.
9. Allow water to come out of the holes for at least
30 minutes.
10. Slide the iron gently on a cloth to eliminate any
stains from the soleplate.
11. Before using the iron again, press the shot of
steam button (1) repeatedly to eliminate any
scale residues.
When making this operation, keep the iron
away from the garments in order not to
stain them.
Auto-Clean Function (K
2
)
If you have been using water from the tap, we
recommend starting the Auto-Clean function after
ironing every time.
The use of the Auto-Clean function should
not be deemed the same as using deminera-
lised water on a regular basis.
1. Check that the appliance is disconnected from
the electrical socket and the steam regulator is
(3) set to Off.
2. Fill the water reservoir (9) up to the maximum
water level (10).
Never add any perfume, vinegar, starch,
scale-removing agents, ironing products or
other chemicals in the water reservoir - unless
recommended by Hotpoint. Never use
contaminated water.
3. Connect the plug of the appliance into a
grounded socket (220/240V).
4. Set the temperature to the maximum value with
the temperature control (4b).
5. Wait at least 2 or 3 minutes to warm the iron
completely.
6. Holding the iron above the sink or a container
made of resistant material, press the Auto-Clean
button (8) and shake gently.
Steam and boiling water will come out of the
soleplate with scale residues and other
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint SIDC30BA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint SIDC30BA1 in the language / languages: English as an attachment in your email.

The manual is 10,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info