665369
8
Zoom out
Zoom in
Previous page
1/16
Next page
88
en
Ifa13ampplug(BS1363)is used itmustbetted
with a 13 amp fuse, either in the plug or adaptor or at
the distribution board.
If you are in any doubt regarding the electrical supply
toyourmachine,consultaqualiedelectricianbefore
use.
How to connect an alternative plug
The wires in this mains lead are coloured in accordan-
ce with the following code:
BLUE NEUTRAL (N)
BROWN LIVE (L)
GREEN & YELLOW EARTH (E)
The power supply cable must never be bent
or dangerously compressed.
The power supply cable must only be repla-
ced by an authorised serviceman.
BEFORE USE
Before using the Power Perfection for the rsttime,
remove all stickers, protective plastic or cardboard
packaging from the soleplate of the iron.
Make sure that all adhesive parts have been removed
from the soleplate using a damp soft cloth and remove
any residues or particles from the manufacturing
processbyrepeatedlyllingandemptyingthewater
reservoir.
When you switch on the Power Perfection
for the rst time, you may notice an
unpleasant smell, a little smoke and some
impurities. They will disappear in a few minutes.
When using the steam function for the rst time,
do not direct the steam jet on the garments
because manufacturing residues may be present
in the steam dispenser.
FILLING THE WATER
RESERVOIR
Water plays an essential role both in the ironing
use of the appliance.
• Use the supplied mat with compact generator,
and keep iron in a horizontal position.
Replacing the fuse
When replacing a faulty fuse, a 13 amp ASTA appro-
ved fuse to BS 1362 should always be used, and the
fusecoverre-tted.Ifthefusecoverislost,theplug
must not be used until a replacement is obtained.
Replacement fuse covers
Ifareplacementfusecoveristted,itmustbeofthe
correct colour as indicated by the coloured marking or
the colour that is embossed in words on the base of
the plug. Replacements can be obtained directly from
your nearest Service Depot.
Removing the plug
If your appliance has a non-rewireable moulded plug
and you should wish to re-route the mains cable throu-
gh partitions, units etc., please ensure that either:
• the plug is replaced by a fused 13 ampere rewi-
reable plug bearing the BSI mark of approval.
or:
• the mains cable is wired directly into a 13 amp
cable outlet, controlled by a switch, (in complian-
ce with BS 5733) which is accessible without
moving the appliance.
Disposing of the plug
Ensure that before disposing of the plug itself, you
make the pins unusable so that it cannot be acciden-
tally inserted into a socket.
Instructions for connecting cable to an
alternative plug
The wires in the mains lead are coloured in
accordance with the following code:
GREEN & YELLOW EARTH
BLUE NEUTRAL
BROWN LIVE
As the colours of the wires in the lead may not corre-
spond with the coloured markings identifying the ter-
minals in your plug, proceed as follows:
• Connect Green & Yellow wire to terminal marked
E or
or coloured Green or Green & Yellow.
• Connect Brown wire to terminal marked L or co-
loured Red.
• Connect Blue wire to terminal marked N or co-
loured Black.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint SGDC11AA1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint SGDC11AA1 in the language / languages: English as an attachment in your email.

The manual is 9,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info