665375

Hotpoint HD Line IIDC60AA0 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
88
en
hotpoint.co.uk
1. Place the Compact Generator in a horizontal
position,openthelidofthellerhole(4)andll
the water reservoir using the water measurer
supplied with the iron (6).
2. Closethelidofthellinghole.
Never add any perfume, vinegar, starch,
scale-removing agents, ironing products or
other chemicals in the water reservoir - unless
recommended by Hotpoint. Never use
contaminated water.
USING THE COMPACT
GENERATOR
Selecting the temperature (B)
If your Compact Generator is equipped with the
Optimal Soleplate Temperature technology, you don’t
need to adjust the temperature and/or steam.
1. Connect the plug of the iron to a grounded socket
(220-240V). When the Compact Generator has
been switched on, a buzzer will sound and the
temperature indicator will light up (8).
2. You can iron all the fabrics that can be ironed in
any order.
In the version with no Optimal Soleplate Temperature
technology, follow the instructions below.
1. Connect the plug of the iron to a grounded socket
(220-240V). When the Compact Generator has
been switched on, a buzzer will sound and the
temperature indicator will light up (8).
2. Use the temperature control (10) to select the
desired temperature. If you go from a lower
temperature to a higher temperature, the
temperature indicator lights up to show that the
Compact Generator is warming up.
3. Once the Compact Generator has reached the
set temperature, the temperature indicator light
goes off.
4. Make sure to check the garment label to
determine the fabric type. If in doubt, iron a hidden
part in order to determine the most appropriate
temperature and avoid damaging the fabric. In
case of very delicate fabrics such as silk, wool
and synthetic materials, iron the garment inside
out to prevent any shiny marks. Start with the
garments that require a low temperature, e.g.
synthetic fabrics.
Fabrics with this symbol on the label
must not be ironed.
GARMENT
LABEL
FABRIC TYPE
TEMPERATURE
INDICATION
synthetic
silk
mixed cotton
wool
mixed wool
cotton
linen
jeans
MIN
MAX
USING THE IRON
Optimal Soleplate Temperature (C)
If your Compact Generator is equipped with the
Optimal Soleplate Temperature technology, you don’t
need to adjust the temperature and/or steam nor to
sort out the garments based on their fabrics. Just
connect the plug of the iron to a grounded socket
(220-240V). As soon as the temperature indicator
light goes off, you can simply start ironing all the
fabrics that can be ironed in any order.
Ironing without steam (D)
Select the recommended ironing temperature using
the temperature control (10) - see step B, chapter
“Using the Compact Generator” and paragraph
“Selecting the temperature”.
Ironing with steam (E)
1. Make sure that the water level in the reservoir is
higher than 1/4.
2. Select the recommended ironing temperature
using the temperature control (10) - see step
B, chapter “Using the Compact Generator” and
paragraph “Selecting the temperature”.
3. Press the steam button (2) to use the steam
ironing function. We recommend using the
steam button function when the temperature is
higherthan●●●.
Wait for the temperature indicator light to
go off before pressing the steam button.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint HD Line IIDC60AA0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint HD Line IIDC60AA0 in the language / languages: English as an attachment in your email.

The manual is 4,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info