Manual Hotpoint CE6IFA.2 X F HA (page 29 of 76) (English, Dutch, French, Italian)

513525

Zoom out

Zoom in

1/76

Start-up and use of

cooking zone

 The glue applied on the gaskets leaves traces of

grease on the glass. Before using the appliance, we

recommend you remove these with a special non-

abrasive cleaning product. During the first few hours

of use there may be a smell of rubber which will

disappear very quickly.

 A few seconds after the hob is connected to the

electricity supply, a buzzer will sound. The hob may

now be switched on.



If the

button is pressed for an extended

period of time, the display scrolls quickly though the

power levels and timer minutes.

Switching on the hob

To switch the hob on, press and hold the button

for approximately one second.

Switching on the cooking zones

Each cooking zone is controlled using a selector

button and a power adjustment device

consisting of a double

and

button.

 To begin operating a cooking zone, press the

corresponding control button and set the desired

power level (between 0 and 9) using the buttons

and

Booster function*

The booster function for some of the cooking zones

may be used to shorten heating-up times. It may be

activated by pressing the

Booster

button. The indicator

light directly above the button will illuminate. This

function boosts the power to 2000 W or 3000 W,

depending on the size of the relevant cooking zone.

The booster stops automatically after 4 minutes. While

the booster for one of the cooking zones is active, the

corresponding front or rear cooking zone will operate at

a reduced power level (e.g. if the booster for the rear

left-hand hotplate has been activated, the power level

of the front left-hand hotplate will be reduced). For

further information, please refer to the Technical

description of the models.

Switching off the cooking zones

To switch off a cooking zone, select it using the

corresponding selector button and:

 Press the

button: the power of the cooking zone

will progressively decrease until it is switched off.

Changing the programme

1. Press the

button repeatedly until the duration

you wish to change is shown.

Only available on certain models.

Programming the cooking duration

! All the cooking zones may be programmed

simultaneously, for a duration between 1 and 99

minutes.

1. Select the cooking zone using the corresponding

selector button.

2. Adjust the power level.

3. Press the

programming button. The indicator

light corresponding to the selected zone will start

flashing.

4. Set the cooking duration using the

and

buttons.

5. Confirm by pressing the button or automatic

selection occurs after 10 seconds.

The timer begins counting down immediately. A

buzzer sounds for approximately 1 minute and the

cooking zone switches off when the set programme

has finished.

Repeat the above procedure for each hotplate you

wish to programme.

Using multiple programmes and the display

If one or more hotplates are programmed, the

display will show the data for the hotplate with the

least time remaining, and the light corresponding to

the position of the hotplate will flash. The lights

corresponding to the other hotplates programmed

will be switched on.

To visualise the time remaining for the other

programmed hotplates, press the

button

repeatedly: the time remaining for each hotplate will

be shown sequentially in clockwise order, starting

from the front left hotplate.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint CE6IFA.2 X F HA in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 4,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint CE6IFA.2 X F HA Manual

Product: