Manual Hotpoint-Ariston WDL 754 (page 11 of 16) (English)

665331

Zoom out

Zoom in

1/16

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles).

The temperature may be lowered, or even set to a cold wash (

The Washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value set for

each wash cycle.

Setting the drying cycle

Turn the DRYING knob to set the desired drying type.

Two options are available:

A - Based on time: from 40 to 180 minutes.

B - Based on the how damp the clothes are once they

have been dried:

Iron

: slightly damp clothes, easy to iron.

Hanger

: dry clothes to put away.

Cupboard

: very dry clothes, recommended for towel-

ling and bathrobes.

If your laundry load to be washed and dried is much gre-

ater than the maximum stated load (see adjacent table),

perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the

drum. At this point, follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the

load.

N.B: when the drying is complete there is a cooling period, even though the DRYING knob is in the

position.

Drying only

Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the desired

drying duration using the DRYING button.

Functions

The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.

To activate the functions:

1. Press the button corresponding to the desired function;

2. the function is enabled when the corresponding indicator light is illuminated.

Note:

- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will flash, a

sound signal will be emitted and the function will not be activated.

- If a function which is incompatible with another function selected previously, only the most recent selection will remain active.

Super Wash

Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this

function offers a high-performance wash.

Extra rinse

By selecting this function, the efficiency of the rinse is increased and optimal detergent removal is guaranteed. It is particularly

useful for sensitive skin.

Reduced Creases

By selecting this function, the wash and spin cycles will be modified in order to reduce the formation of creases. At the end of

the cycle the washing machine will perform slow rotations of the drum; the REDUCED CREASES and START/PAUSE indi-

cator lights will flash (orange) and the

phase will remain lit in a fixed manner. To end the cycle, press the START/PAUSE

button or the REDUCED CREASES button.

For the Silk wash cycle, the machine will end the cycle while the laundry is soaking, the REDUCED CREASES and START/

PAUSE indicator lights will flash (orange) and the RINSE phase will remain lit in a fixed manner. To drain the water so that the

laundry may be removed, press the START/PAUSE button or the REDUCED CREASES button.

Note: If you also want to run the drying cycle, this button is enabled only if combined with level “Iron Dry”.

Slow Spin

By selecting this function, reduces the spin speed.

Personalisation

Table of Drying times (guideline values)

Fabric

type

Load type

Max.

load (kg)

Cupboard

dry

Hanger

dry

Iron

dry

Cotton

Clothing of diffe-

rent sizes, Terry

towels

5 250 210 90

Synthe-

tics

Sheets, Shirts, Py-

jamas, socks, etc.

3 180 130 115

Wool

Knitwear, Pullo-

vers. etc.

1.5 155 135 115

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston WDL 754 in the language / languages: English as an attachment in your email.

The manual is 0,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston WDL 754 Manual

Product: