665336
11
Zoom out
Zoom in
Previous page
1/16
Next page
GB
11
Personalisation
Setting the temperature
By pressing the TEMPERATURE button to set the wash temperature (see Table of wash cycles).
The temperature may be lowered, or even set to a cold wash (
).
The washer-dryer will automatically prevent you from selecting a temperature which is higher than the maximum value
set for each wash cycle.
Setting the drying cycle
The desired drying cycle type may be set by pressing the DRYING button once or several times. Two options are availa-
ble:
A - Based on time: from 40 to 180 minutes.
B - Based on the how damp the clothes are once they have been dried:
Iron dry
: slightly damp clothes, easy to iron.
Cupboard dry
: very dry clothes, recommended for towelling and bathrobes.
If your laundry load to be washed and dried is much greater than the maximum stated load (see Table of wash cycles),
perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in
the drum. At this point, follow the instructions provided for a “Drying only cycle. Repeat this procedure for the remain-
der of the load.
N.B.: when the drying is complete there is a cooling period, even though the DRYING button is in the 0 position.
Drying only
Turn the WASH CYCLE knob to one of the drying settings (11-12-13) according to the type of fabric, then select the
desired drying duration using the DRYING button.
Functions
The various wash functions available with this Washer-dryer will help to achieve the desired results, every time.
To activate the functions:
1. Press the button corresponding to the desired function;
2. the function is enabled when the corresponding indicator light is illuminated.
Note:
- If the selected function is not compatible with the programmed wash cycle, the corresponding indicator light will
flash, a sound signal will be emitted and the function will not be activated..
- If a function which is incompatible with another function selected previously, only the most recent selection will
remain active.
Delay Start
To set a delayed start for the selected wash cycle, press the button repeatedly until the desired delay time is displayed
(this may be between 1 hour and 24 hours).
To disable the function press the button until the text
is displayed.
N.B. Once you have pressed the START/PAUSE button, the delay time may only be decreased if you wish to modify it.
Mini Load
This function is recommended for when the load of laundry is equal to half, or less than half, of the maximum recom-
mended load (see Table of wash cycles).
Super Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle dura-
tion, this function offers a high-performance wash.
Slow Spin (1400-600)
By selecting this function, reduces the spin speed.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hotpoint-Ariston WDF 740 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston WDF 740 in the language / languages: English as an attachment in your email.

The manual is 0,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info