Manual Hotpoint-Ariston ST 328 A HA (page 18 of 84) (English, German, Dutch, French, Italian, Portuguese, Spanish)

479318

Zoom out

Zoom in

1/84

Start-up and use

Starting the dishwasher

1. Turn the water tap on.

2. Open the door and press the ON/OFF button: you will hear a

short beep and the display and option indicator lights switch on.

3. Measure out the detergent (

see below

4. Load the racks (

see Loading the racks

5. Select the wash cycle in accordance with the type of crockery

and its soil level (

see Table of wash cycles

), by pressing the P

button.

6. Select the wash options (

see adjacent information

7. Start the wash cycle by shutting the door: a long beep signals

the start of the wash cycle.

8. Two short beeps and one long one indicate the end of the

wash cycle and the wash cycle number flashes on the display.

Open the door, switch off the appliance by pressing the ON/OFF

button, shut off the water tap and unplug the appliance from the

electricity socket.

9. Wait for a few minutes before removing the crockery, in order

to avoid burns. Unload the racks, beginning with the lower level.

- The machine will switch off automatically during

certain periods of inactivity, in order to minimise

electricity consumption.

AUTO WASH CYCLES*: this model of dishwasher is

equipped with a special sensor which can be used to assess the

level of soiling and automatically select the most efficient and

economic wash cycle accordingly.

The duration of the auto wash cycles may vary due to the

operation of the sensor.

If the crockery is only lightly soiled or if it has been rinsed

with water before being placed in the dishwasher, reduce the

amount of detergent used accordingly.

Modifying a wash cycle in progress

If a mistake was made during the wash cycle selection process

it is possible to change the cycle, provided that it has only just

begun: open the door, avoiding the escaping steam, and press

and hold the ON/OFF button; the machine will switch off with a

long beep. Switch the machine back on using the ON/OFF button

and select the new wash cycle and any options desired; start the

cycle by closing the door.

Adding extra crockery

Without switching off the machine, open the door, taking care to

avoid the escaping steam, and place the crockery inside the

dishwasher. Close the door: the cycle starts from the point at

which it was interrupted.

Accidental interruptions

If the door is opened during the wash cycle, or if there is a power

cut, the cycle stops. It starts again from the point at which it was

interrupted once the door has been shut or once the electricity

supply is restored.

Measuring out the detergent

A good wash result also depends on the correct amount of

detergent being used; exceeding the stated amount does not

result in a more effective wash and increases environmental

pollution.

Only use detergent which has been specifically

designed for dishwashers.

DO NOT USE washing up liquid.

Using excessive detergent may result in foam

residue remaining in the machine after the cycle

has ended.

The use of tablets is only recommended for

models which offer the MULTI-FUNCTIONAL

TABLETS option.

To achieve the best results from each washing

and drying cycle, powder detergent, rinse aid liquid

and salt should be used.

Compartment A: Washing detergent

Compartment B: Pre-wash detergent

1. Open cover C by pressing button

2. Pour in the detergent after consulting

the Table of wash cycles:

• For powder detergent use

compartments A and B.

• For detergent in tablet form: when

the cycle requires 1 tablet, place it in

compartment A and close the cover;

when it requires 2, place the second tablet at the bottom of the

appliance.

3. Remove detergent residues from the edges of the compartment

and close the cover until it clicks.

* Only available in selected models.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston ST 328 A HA in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston ST 328 A HA Manual

Product: