Manual Hotpoint-Ariston LVZ 670 DUO ALU (page 17 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

513327

Zoom out

Zoom in

1/80

ARISTON DISHWASHER - Instructions for installation and use

ISHWASHER

You have loaded your dishes and you now have to set the

wash cycle. It takes just one minute to learn how

Starting the dishwasher

Ready, steady, go!

You can cancel the

wash cycle in

progress, if it has

only just started.

Make sure the wash

cycle has ended

before removing the

dishes!

If opening the door

soon after the end of

the programme,or

during it, stand away

from the Dishwasher,

to avoid possible

injury from hot

steam.

First of all.

After performing all the operations

described in the previous

paragraphs, turn the water tap on

completely and press ON-OFF

button "A": you will hear a short

beep and indicator light "B" lights

up. Now the appliance is on and

ready to be programmed.

Selecting the wash

cycle.

To select the wash cycle, turn the

cycle selector knob "D" clockwise

until the reference notch on the

knob corresponds with the number

or symbol for the cycle you wish

to set (consult the wash cycle

table on page 17, especially when

first using the appliance).

If the appliance door is shut,

press the Start button "R" and you

will hear a beep; the cycle will

start up within a few seconds.

During this time, you can modify

your choice of wash cycle. A short

beep will indicate the start of the

wash cycle and indicator light "G"

corresponding to the cycle starting

phase will light up.

The dishwasher keeps

you informed.

Your dishwasher is fitted with

indicator lights (G) which light up

to indicate the cycle phase under

way.

Here are the symbols correspond-

ing to each cycle phase:

pre-wash, wash, rinses, drying.

At all times, your dishwasher tells

you which cycle phase is under

way.

Modifying a wash cycle

in progress.

But if you have chosen the wrong

cycle, not to worry! You can cancel

the wash cycle in progress, if it has

only just started.

To modify a wash cycle, keep the

RESET button "R" pressed for

about 5 seconds: a prolonged beep

will sound, followed by three short

beeps. Indicator light "G" will turn

off and at this point, all the settings

will have been cancelled.

To select a new wash cycle,

repeat the operations illustrated

in the paragraph entitled "starting

and selecting the cycle".

You are now free to re-set the

correct wash cycle.

You've left out a dish?

Well, it happens to everyone.

Interrupt the wash cycle by

pressing the ON-OFF button,

insert the dish you had forgotten

and press the ON-OFF button

again. The cycle will start up from

where you interrupted it.

Finished?

The end of the wash cycle is

indicated by two short beeps and

the flashing of the drying phase

indicator light.

Turn off the water tap.

Wait a few minutes before

unloading the dishes: if you wait

a little while, they dry better thanks

to the steam.

Empty the lower rack first.

There's been a power

failure? Have you

opened the dishwasher

door?

The wash cycle stops and then

restarts when the electricity

comes back on or when you

shut the door. Everything is

under control!

Warning:

Turn the appliance off by pressing

button A, unplug the appliance

from the electricity socket to cut

off the power supply; the power

supply cable should

consequently be easily

accessible.

Do you want extra

drying?

Press button "E" before you start

the selected wash cycle.

A prolonged beep will inform you

that you have selected extra drying,

a short beep indicates it has been

disabled.

With extra drying, the wash cycle

will last longer, to provide you with

drier dishes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston LVZ 670 DUO ALU in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 15,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston LVZ 670 DUO ALU Manual

Product: