Manual Hotpoint-Ariston li 480 a c (page 17 of 80) (English, German, Dutch, French, Italian, Portuguese, Spanish)

127242

Zoom out

Zoom in

1/80

ARISTON DISHWASHER - Instructions for installation and use

1509)50-4

You have loaded your dishes and you now have

to set the wash cycle. It takes just one minute

to learn how

Starting the dishwasher

Make sure the

wash cycle has

ended before

removing the

dishes!

If opening the door

soon after the end

of the

programme,or

during it, stand

away from the

Dishwasher, to

avoid possible

injury from hot

steam.

First of all.

After performing all the op-

erations described in the

previous paragraphs, turn

the water tap on completely,

open the appliance door and

press ON-OFF button "A":

indicator light "B" comes

on. Your appliance is now

on and awaiting instruc-

tions.

Selecting the wash

cycle.

Select the wash cycle by

pressing button "P". Each

time this button is pressed,

one of the indicator lights

"M" will come on in se-

quence, select the wash cy-

cle you deem most suitable

for the type of dishes to

wash (take a look at page

17, where you will find the

wash cycle table). Close the

appliance door and after a

few seconds, you will hear

a short beep: the wash cy-

cle has begun.

Modifying a wash cycle in

progress.

But if you have chosen the

wrong cycle, not to worry!

You can modify the wash

cycle in progress, if it has

only just started. Open the

appliance door carefully to

avoid any hot water

splashes, then keep button

"P" pressed for approxi-

mately 5 seconds, until you

hear 3 short beeps. Indica-

tor light "M" will come off

and at this point, all the set-

tings will have been can-

celled. You are now free to

re-set the correct wash cy-

cle.

You've left out a dish?

Well, it happens to every-

one. Interrupt the wash cy-

cle by opening the appliance

door with the utmost care,

as usual, then insert the

dish you had forgotten.

When you shut the appli-

ance door, the cycle will

start up from where you in-

terrupted it.

Finished?

The end of the wash cycle

is indicated by a double

beep and the flashing of the

wash cycle indicator light

"M".

Turn off the water tap.

Wait a few minutes before

unloading the dishes: they

are very hot! If you wait a

little while, they dry better

thanks to the steam.

Empty the lower rack first.

You can modify

the wash cycle in

progress, if it

has only just

started.

There's been a power

failure? Have you

opened the

dishwasher door?

The wash cycle stops and

then restarts when the

electricity comes back on or

when you close the door.

Everything is under control!

Ready, steady, go!

If you have delayed the

start of your wash cycle,

it is best if you do not

modify anything while

you wait during the

countdown.

If you really have to,

then press button "P"

and keep it pressed down

for approximately 5

second You will hear 3

short beeps and all the

settings will be cancelled.

You can now repeat the

programming operations.

You decide when it

starts.

When you have loaded the

dishes, you can choose

when to start your

dishwasher before setting

the wash cycle desired.

Press button "C" to delay the

start of the wash cycle by

2, 4 or 6 hours. Each time

you press it, you will hear a

short beep and indicator

light "D" corresponding to

the selected delay will come

on.

Now you can select the

desired wash cycle.

Close the appliance door

and, after you hear the beep,

the countdown to the

delayed start will begin.

Once this time is up,

indicator light "D" will stop

flashing and the wash cycle

will begin.

Warning!

Open the dishwasher

door, turn off by

pressing button “A”, un-

plug the appliance from

the electricity socket to

cut off the power supply;

the power supply cable

should consequently be

easily accessible.

Have you changed

your mind?

If you change your mind and

you wish to set a different

delay, just open the

appliance door, press button

"C" and repeat the selection.

If on the other hand you

want to cancel the delay set

and you wish to start the

wash cycle immediately,

press the button in sequence

until indicator light "D"

comes off.

Once you close the appliance

door, the wash cycle set

previously will begin.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston li 480 a c in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 33,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston li 480 a c Manual

Product: