Manual Hotpoint-Ariston ECO7D 1492 (page 66 of 84) (English, German, Dutch, Danish, Swedish, Norwegian, Finnish)

479281

Zoom out

Zoom in

1/84

Running a wash cycle

1. SWITCH THE MACHINE ON. Press the

button; the text WELCOME will appear on the

display and the START/PAUSE indicator light will

flash slowly in a green colour.

2. LOAD THE LAUNDRY. Open the porthole door.

Load the laundry, making sure you do not exceed

the maximum load value indicated in the table of

programmes on the following page.

3. MEASURE OUT THE DETERGENT. Pull out the

detergent dispenser drawer and pour the detergent

into the relevant compartments as described in

"Detergents and laundry".

4. CLOSE THE DOOR.

5. SELECT THE WASH CYCLE. Press one of the

WASH CYCLE SELECTOR buttons to select the

required wash cycle; the name of the wash cycle

will appear on the display. A temperature and spin

speed is set for each wash cycle; these may be

adjusted. The duration of the cycle will appear on

the display.

6. CUSTOMISE THE WASH CYCLE. Use the

relevant buttons:

 Modifying the temperature and/or spin

speed. The machine automatically selects the

maximum temperature and spin speed set for the

selected wash cycle; these values cannot therefore

be increased. The temperature can be decreased

by pressing the

button, until the cold wash

"OFF" setting is reached. The spin speed may be

progressively reduced by pressing the

button,

until it is completely excluded (the "OFF" setting). If

these buttons are pressed again, the maximum

values are restored.

Setting a delayed start.

To set a delayed start for the selected programme,

press the corresponding button repeatedly until the

required delay period has been reached. When this

option is enabled, the

symbol lights up on the

display. To remove the delayed start function press

the button until the text "OFF" appears on the

display.

 Modifying the cycle settings.

 Press the button to enable the function; the

indicator light corresponding to the button will

switch on.

 Press the button again to disable the function;

the indicator light will switch off.

 If the selected function is not compatible with the

programmed wash cycle, the indicator light will

flash and the function will not be activated.

 If the selected function is not compatible with

another function which has been selected

previously, the indicator light corresponding to the

first function selected will flash and only the second

function will be activated; the indicator light

corresponding to the enabled function will remain lit.

 The functions may affect the recommended load

value and/or the duration of the cycle.

7. START THE PROGRAMME. Press the START/

PAUSE button. The corresponding indicator light will

become green, remaining lit in a fixed manner, and

the door will be locked (the DOOR LOCKED

symbol will be on). During the wash cycle, the

name of the phase in progress will appear on the

display. To change a wash cycle while it is in

progress, pause the washing machine using the

START/PAUSE button (the START/PAUSE indicator

light will flash slowly in an orange colour); then

select the desired cycle and press the START/

PAUSE button again.

To open the door while a cycle is in progress, press

the START/PAUSE button; if the DOOR LOCKED

symbol is switched off the door may be

opened. Press the START/PAUSE button again to

restart the wash cycle from the point at which it

was interrupted.

8. THE END OF THE WASH CYCLE. This will be

indicated by the text "END OF CYCLE" on the

display; when the DOOR LOCKED

symbol

switches off the door may be opened. Open the

door, unload the laundry and switch off the

machine.

 If you wish to cancel a cycle which has already

begun, press and hold the

button. The cycle will be

stopped and the machine will switch off.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston ECO7D 1492 in the language / languages: English, German, Dutch, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston ECO7D 1492 Manual

Product: