Manual Hotpoint-Ariston CE6IFA.2 F (page 35 of 68) (English, Dutch, French, Italian)

479549

Zoom out

Zoom in

1/68

Automatic cleaning using the FAST

CLEAN function

With the FAST CLEAN mode, the internal temperature

of the oven reaches 500°C. The pyrolytic cycle is

activated, burning away food and grime residues. Dirt

is literally incinerated.

Keep children away from the appliance during the

automatic cleaning cycle as surfaces may become

very hot. Particles may ignite inside the oven due to the

combustion process. There is no cause for concern:

this process is both normal and hazard-free.

Before initiating the FAST CLEAN mode:

• Remove large or coarse food residues from the

inside of the oven using a damp sponge. Do not use

detergents.

• Remove all accessories.

• Do not place tea towels or pot holders over the oven

handle.

• Turn the SELECTOR knob to the “0” position.

! If the oven is too hot, the pyrolytic cycle may not start.

Wait for the oven to cool down.

! The programme may only be started once the oven

door has been closed.

! To obtain the best results from the pyrolysis cycle,

we recommend that you do not use the hob while the

process is being carried out.

To activate the FAST CLEAN cycle press and hold the

button for approximately 4 seconds. The TIMER

KNOB may be used to select the desired cleaning

level; there are three default time settings which cannot

be modified.

1. Economy (ECO): turn the knob towards “-”. Duration

1 hour.

2. Normal (NOR): initial level. Duration 1 hour and 30

minutes.

3. Intensive (INT): turn the knob towards “+”. Duration

2 hours.

4. Press the

button to confirm.

An end time for the FAST CLEAN cycle (as for a normal

cooking cycle) may be programmed (see Programming

the automatic cleaning end time).

Safety devices

• The

icon on the display, when lit, indicates

that the oven door was automatically locked as soon

as the temperature reached a high value.

• The

icon indicates that the cleaning cycle

may be cancelled at any time by pressing the

button.

• If a malfunction occurs, the heating elements will be

switched off.

• Once the oven door has been locked, you cannot

change the duration and cycle end time settings.

Programming the automatic cleaning end time

1. Press the

button until the icon and the two

digits on the DISPLAY begin to flash.

2. Turn the TIMER KNOB towards “+” and “-” to adjust

the hour value.

3. Press the

button again until the other two digits

on the DISPLAY begin to flash.

4. Turn the TIMER KNOB towards “+” and “-” to adjust

the minute value.

5. Press the

button again to confirm.

6. When the set time has elapsed, the text END

appears on the display and a buzzer sounds.

• For example: it is 9:00 a.m. and the Economy (ECO)

FAST CLEAN level has been selected, with the

default duration of 1 hour. 12:30 is scheduled as the

end time. The programme will start automatically at

11:30 a.m.

Programming has been set when the

and

buttons are illuminated. The display shows the FAST

CLEAN end time and duration alternately.

Once the automatic cleaning cycle is over

You will have to wait until the temperature inside the

oven has cooled down sufficiently before you can open

the oven door. You will notice some white dust deposits

on the bottom and the sides of your oven; remove

these deposits with a damp sponge once the oven has

cooled down completely. Alternatively, you can make

use of the already heated oven, in which case it is not

necessary to remove the deposits, they are completely

harmless and will not affect your food in any way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston CE6IFA.2 F in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston CE6IFA.2 F Manual

Product: