Manual Hotpoint-Ariston CE6IFA.2 F (page 30 of 68) (English, Dutch, French, Italian)

479549

Zoom out

Zoom in

1/68

Safety devices

Pan sensor

Each cooking zone is equipped with a pan sensor

device. The hotplate only emits heat when a pan with

suitable measurements for the cooking zone is placed

on it. If the indicator light is flashing, it may indicate:

• An incompatible pan

• A pan whose diameter is too small

• The pan has been removed from the hotplate.

Residual heat indicators

Each cooking zone is equipped with a residual heat

indicator. This indicator signals which cooking zones

are still at a high temperature. If the power display

shows

, the cooking zone is still hot. It is possible,

for example, to keep a dish warm or melt butter or

chocolate. As the cooking zone cools, the power

display will show

. The display switches off when the

cooking zone has cooled sufficiently.

Overheating protection

If the electronic elements overheat, the hob switches

off automatically and

F appears on the display,

followed by a flashing number. When the temperature

has reached a suitable level, this message disappears

and the hob may be used again.

Safety switch

The appliance has a safety switch which automatically

switches the cooking zones off after they have been

in operation for a certain amount of time at a particular

power level. When the safety switch has been

triggered, the display shows “0”.

For example: the right rear hotplate is set to 5 and will

switch off after 5 hours of continuous operation, while

the front left hotplate is set to 2 and will switch off after

8 hours.

Buzzer

This can also indicate several irregularities:

• An object (a pan, cutlery, etc.) has been placed on

the control panel for more than 10 seconds.

• Something has been spilt on the control panel.

• A button has been pressed for too long. All of the

above situations may cause the buzzer to sound.

Remove the cause of the malfunction to stop the

buzzer. If the cause of the problem is not removed,

the buzzer will keep sounding and the hob will

switch off.

Technical description of cooking zones

The induction system is the quickest existing way of

cooking. Unlike traditional hotplates where the cooking

zone heats up, with the induction system heat is

generated directly inside ferromagnetic based pans.

Key:

I = single induction cooking zone

B = booster: the power of the cooking zone may be

boosted to 3000W

* = the maximum power is limited to 600 W until the

booster is activated for the appropriate rear cooking

zone (see Start-up and use).

Power level

Maximum operating

time in hours

Hobs

CE6IFA.1 F /HA

CE6IFA.1 X F /HA

CE6IFA.2 F /HA

CE6IFA.2 X F /HA

Cooking zone Power (W)

Back Left

I 1400 – 600 se Ant. Sx*

Back Right

I 2200 – B 3000*

Front Left

I 2200 – B 3000*

Front Right

I 1400 – 600 se Post. Dx*

Total power

7200

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston CE6IFA.2 F in the language / languages: English, Dutch, French, Italian as an attachment in your email.

The manual is 1,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston CE6IFA.2 F Manual

Product: