to exceed the “max” level marked on the central pivot (see
figure). To bleach laundry without carrying out a full wash
cycle, pour the bleach into the extra compartment 4, select
the “Rinse” cycle and activate the “Super Wash” option.
!The use of extra compartment 4 excludes the “Pre-wash”
function.
! It cannot be used with the , , , , “Fast Spin Cottons”,
“Pump out”.
Extra Rinse
By selecting this option, the efficiency of the rinse is increased
and optimal detergent removal is guaranteed. It is particularly
useful for sensitive skin.
! It cannot be used with the “Fastwash 30’”, , , “Fast Spin
Cottons”, “Pump out”.
Table of wash cycles
Easy Iron
By selecting this function, the wash and spin cycles will be modified
in order to reduce the formation of creases. At the end of the cycle
the washing machine will perform slow rotations of the drum; the
EASY IRON and START/PAUSE indicator lights will flash (orange)
and the text “END OF CYCLE” will appear on the display. To end
the cycle, press the START/PAUSE button or the EASY IRON
button. To drain the water so that the laundry may be removed,
press the START/PAUSE button or the EASY IRON button.
! It cannot be used with the , “Fastwash 30’”, , , .
Prewash
If this function is selected, the pre-wash cycle will run; this is
useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
! It cannot be used with the , , , , ,
(60°),(40°),
.
Eco Wash
The Eco Wash function saves energy by not heating the
water used to wash your laundry – an advantage both to the
environment and to your energy bill. Instead, intensified wash
action and water optimisation ensure great wash results in the
same average time of a standard cycle.
For the best washing results we recommend the usage of a
liquid detergent.
! It cannot be used with the ,,, , , .
M
AX
1
2
4
3
Wash cycles
Description of the wash cycle
Max. temp.
(°C)
Max. speed
(rpm)
Detergents
Max. load
(kg)
Residual dam-
pness %
Energy con-
sumption kWh
Total water lt
Cycle duration
Prewash
Wash
Fabric
softener
Bleach
Anti Stain
40°1400
4--
-
180’
Standard Cotton 60° (1) (1st press of the button): heavily soiled whites and
delicate colours.
60°
(Max. 90°)
1400
(3)
7531,1052,5190’
Standard Cotton 40° (2) (2nd press of the button): lightly soiled whites and
delicate colours.
40°1400-
7530,99
82
185’
Standard Cotton 20° (3rd press of the button): lightly soiled whites and
delicate colours.
20°1400-
7--
-
170’
Synthetics Resistant (1st press of the button): heavily soiled resistant colours.60°800
3440,9347110’
Synthetics Resistant (4)(1st press of the button): lightly soiled resistant colours.40°800
3440,574695’
Synthetics Delicate (2nd press of the button): lightly soiled resistant colours.40°800
3---70’
Fastwash 60'(1st press of the button): to refresh normal soiled garments quic-
kly (not suitable for wool, silk and clothes which require washing by hand).
60° 1400-
-3,5530,814060’
Fastwash 30'(2nd press of the button): to refresh lightly soiled garments quic-
kly (not suitable for wool, silk and clothes which require washing by hand).
30° 800-
-3710,153530’
M
My Cycle: allows for any wash cycle to be stored.
Anti Allergy
60°1400-
-4---195’
Woolmark Platinum (Wool): for wool, cashmere, etc.40° 800-
-1,5---70’
Delicates
30° 0-
-1---80’
Fast Spin Cottons (1st press of the button)-1400----7---16’
Rinse Cottons (2nd press of the button)-1400--
7---36’
Pump out(3rd press of the button)-0----7---2’
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors
such as water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 60°C (1st press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 40°C(2nd press of the button).
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be
washed at 40°C. The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle 40°C(2nd press of the button).
4) Long wash cycle for synthetics: set wash cycle 60°C(1st press of the button); temperature of 40°C(press TEMPERATURE button).
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hotpoint-Ariston BWMD 742 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hotpoint-Ariston BWMD 742 in the language / languages: German as an attachment in your email.
The manual is 5,44 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
