Manual Hotpoint-Ariston artl 104 ha (page 5 of 48) (English, Spanish)

313599

Zoom out

Zoom in

1/48

Function buttons and corresponding indicator lights

When a function is selected, the corresponding

indicator light will illuminate.

If the selected function is not compatible with the

programmed wash cycle, the corresponding indicator

light will flash and the function will not be activated.

If a function which is incompatible with another

function selected previously, only the most recent

selection will remain active.

Lid locked indicator light

If this indicator light is on, the appliance door is locked to

prevent it from being opened accidentally; to avoid any

damage, wait for the indicator light to switch off (it will take

about three minutes) before you open the appliance door.

N.B. If the DELAY TIMER function is activated, the door

cannot be opened; pause the machine by pressing the

START/PAUSE button if you wish to open it.

 If the START/PAUSE indicator light (orange) flashes

rapidly at the same time as the function indicator

light, this indicates a problem has occurred (see

Troubleshooting).

How to open and to close the drum

Wash

Rinse

Spin

Drain

End of wash cycle

Fig. 1

Fig. 2

Fig. 3

Fig. 4

A) Opening (Fig. 1):

Lift the external lid and open it completely.

B) Then open the drum using both hands as

shown in Fig.2:

- press the button indicated by the arrow in fig. 2

lightly downwards, with one hand firmly resting on

the doors to prevent them from suddenly opening

and hurting your fingers;

- therefore follow the appliance doors along as

these unhook and open easily.

C) Loading the washing machine (Fig. 3).

D) Shutting (Fig. 4):

- close the drum fully by first shutting the front

door followed by the rear one;

- then ensure the hooks on the front door are

perfectly housed within the seat of the rear door;

- after the hooks have clicked into position, press

both doors lightly downwards to make sure they

do not come loose;

- finally shut the external lid.

Starting a wash cycle

1. Turn the washing machine on by pressing the

ON/OFF button. All the indicator lights will turn on for

a few seconds, then only the indicator lights relative

to the selected programme settings will remain lit and

the START/PAUSE indicator light will flash.

2. Load the laundry, close the door and the lid.

3. Set the WASH CYCLE knob to the desired

programme.

4. Set the washing temperature (see

Personalisation).

5. Set the spin speed (see Personalisation).

6. Measure out the detergent and washing additives

(see Detergents and laundry).

7. Select the desired functions.

8. Start the wash cycle by pressing the START/

PAUSE button and the corresponding indicator light

will remain lit in a fixed manner, in green.

To cancel the set wash cycle, pause the machine by

pressing the START/PAUSE button and select a new

cycle.

9. At the end of the wash cycle the

indicator light

will switch on. The LID LOCKED indicator light will

switch off, indicating that the door may be opened.

Take out your laundry and leave the appliance door

ajar to make sure the drum dries completely.

Switch the washing machine off by pressing the ON/

OFF button.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston artl 104 ha in the language / languages: English, Spanish as an attachment in your email.

The manual is 1,52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston artl 104 ha Manual

Product: