This option offers a high-performance wash due to the
greater quantity of water used in the initial phase of the
cycle, and due to the increased wash cycle duration,
is particularly useful for
the removal of stubborn
stains. It can be used with
or without bleach. If you
desire bleaching, insert the
extra tray compartment (3)
into compartment 1. When
pouring in the bleach, be
careful not to exceed the
“max” level marked on the
central pivot (see figure).
To bleach laundry without
carrying out a full wash cycle, pour the bleach into the
extra compartment 3, select the “Rinse” cycle and
activate the “Super Wash” option .
! It cannot be used in conjunction with , , , , ,
, , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button. For the Silk wash
cycle, the machine will end the cycle while the laundry is
soaking and the “Easy Iron” indicator light will flash. To
drain the water so that the laundry may be removed, press
the START/PAUSE button or the “Easy Iron” button.
! It cannot be used in conjunction with , , , , .
Time Saver
If you select this option, the wash cycle duration will be
reduced by 30%-50%, depending on the selected cycle,
thereby guaranteeing simultaneous water and energy
saving. Use this cycle for lightly soiled garments.
! It cannot be used in conjunction with , , , , ,
, , , .
Extra rinse
By selecting this option, the efficiency of the rinse is
increased and optimal residual detergent removal is
guaranteed. It is particularly useful for skin which is
sensitive to detergents. We recommend this option is used
with a full load of washing, or when a large amount of
detergent is required.
! It cannot be used in conjunction with , , .
3
1
2
Wash cycles and options
Table of wash cycles
IconDescription of the wash cycle
Max. temp.
(°C)
Max.
speed
(rpm)
Detergent and additives
Max.
load
(kg)
Cycle
duration
Pre-
wash
Wash
Fabric
softener
Bleach
Cottons wash cycles
Cottons with pre-wash
(Add detergent to the relevant compartment).
90°1400
-9
Cottons (1-2): heavily soiled whites and resistant colours.
60°
(Max. 90°C)
1400-
9
Cottons (2): heavily soiled whites and delicate colours.40°1400-
9
Coloured Cottons (3)
40° 1400-
9
Shirts
40° 600-
2
Jeans
40°800-
-4
Special programmes
Baby: heavily soiled delicate colours40°800-
4
Durable Synthetics
60°800-
4
Durable Synthetics (4)
40°800-
4
Delicate Synthetics
40°800-
4
"Bed & Bath" for bedlinen and towels.60° 1400-
9
Duvets: for down-stuffed garments.30° 1200-
-3,5
Silk: for garments in silk and viscose, lingerie.30° 0-
-2
Wool: for wool, cashmere, etc.40° 800-
-2
Mix 30': to refresh lightly soiled garments quickly (not suitable
for wool, silk and clothes which require washing by hand)
30° 800-
-3,5
Partials wash cycles
Rinse-1400--
9
Spin -1400----9
Drain-0----9
(*) The duration of the wash cycles can be checked on the display.
(*) Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this
value will then be shown on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with regulation 2010/1061: set wash cycle with a temperature 60°C and 40°C.
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
3) Short wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hotpoint-Ariston AQUALTIS AQ9F 492 U at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hotpoint-Ariston AQUALTIS AQ9F 492 U in the language / languages: English, German, Dutch, French, Portuguese, Spanish as an attachment in your email.
The manual is 4,13 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
