pouring in the bleach, be careful not to exceed the “max” level
marked on the central pivot (see figure). To bleach laundry
without carrying out a full wash cycle, pour the bleach into the
extra compartment 3, select the “Rinse” cycle and activate
the “Super Wash” option .
! It cannot be used in conjunction with ,, ,, , ,
, , , .
Extra rinse
By selecting this option, the efficiency of the rinse is increased
and optimal residual detergent removal is guaranteed. It is
particularly useful for skin which is sensitive to detergents. We
recommend this option is used with a full load of washing, or
when a large amount of detergent is required.
! It cannot be used in conjunction with,, , , , .
Easy Iron
By selecting this option, the wash and spin cycles will be
modified in order to reduce the formation of creases.
At the end of the cycle the washing machine drum will
rotate slowly; the “Easy Iron” and START/PAUSE indicator
lights will flash. To end the cycle press the START/PAUSE
button or the “Easy Iron” button.
! It cannot be used in conjunction with , , , , ,.
Prewash
If this function is selected, the pre-wash cycle will run; this is
useful for removing stubborn stains.
N.B.: put the detergent in the relevant compartment.
! It cannot be used in conjunction with ,, ,,,
, , , ,, , (60°), .
Table of wash cycles
Note: 10 minutes after the START, the machine will recalculate the time remaining until the end of the wash cycle on the basis of the load inside it; this value will then be shown on the display.
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as
water temperature and pressure, the amount of detergent used, the amount and type of load inserted, load balancing and any wash options selected.
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for
garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
3) At 60 °C the “Prewash” function cannot be selected.
For all Test Institutes:
2) Long wash cycle for cottons: set wash cycle with a temperature of 40°C.
4) Long wash cycle for synthetics: set wash cycle with a temperature of 40°C.
Icon
Description of the wash cycle
Max.
temp.
(°C)
Max.
speed
(rpm)
Detergent and addi-
tives
Max. load (kg)
Residual dam-
pness %
Energy con-
sumption kWh
Total water lt
Cycle duration
Prewash
Wash
Bleach
Fabric
softener
Synthetics Resistant60°800
5 481,2174125’
Synthetics Resistant (4)40°800
5 480,7172105’
Coloureds Intensive
40°1600
-
9 ---175’
Multi Colour
20°1600-
-
9 ---185’
Darks
30°800-
-
6 ---80’
Shirts
40° 600-
2,5---85’
Duvets: for down-stuffed garments.30° 1200-
-
3,5---120’
Bed&Bathfor bedlinen and towels.60° 1600
10---160’
Rinse
-1600--
10---49’
Spin and Pump out-1600----10---16’
Anti Allergy Plus
60° 1600-
-
6---210’
Anti Allergy Delicate
40° 1600-
-
6---230’
Ultradelicates
30°0-
-
1---80’
Wool: for wool, cashmere, etc.40° 800-
-
2,5---105’
Mix 30':to refresh lightly soiled garments quickly (not suitable for
wool, silk and clothes which require washing by hand).
30° 800-
-
4 710,204430’
Cotton Standard 60°C (1): heavily soiled whites and resistant colours.
60°
(Max. 90°)
1600
(3)
10440,9560200’
Cotton Standard 40°C (2): lightly soiled whites and delicate colours.40°1600-
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Hotpoint-Ariston AQ105D 69D EU AQUALTIS at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Hotpoint-Ariston AQ105D 69D EU AQUALTIS in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.
The manual is 12,03 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
