Manual Hotpoint-Ariston ald 140 ex (page 34 of 60) (English, German, Dutch, French)

311503

Zoom out

Zoom in

1/60

ARGHERITA

Margherita - Instructions for installation and use

To use this, press the Select

button until the On sign comes on.

During a wash cycle, the

selectionof this option is indicated

by symbol

coming on.

This option is available on

programmes 2-3-5-6-7-8-10 and

Rinse cycles.

Note: It must not be used with the

Easy iron option.

Easy iron

This function allows your

washing to come out of the

machine without creases,

making it much easier to iron.

The appliance optimises the

washing conditions according to

the type of fabrics that are being

washed.

It is enabled with programmes

3-5-6-7-8-11 and Rinse cycles.

To enable it, press the Select

button until the On sign comes on.

In programmes 6-7-8-11 and

Light Rinse cycles, the wash

cycle is interrupted and the

washing is left to soak in water

before the appliance is drained.

To complete the cycle, press the

Select button.

During a wash cycle, the enabling

of this option is indicated by

symbol

coming on.

Note: It must not be used with

the Stain removal option.

Note: Functions and are disabled.

F G

Mode Select

Here Im in command

Understanding the control panel

Making the right choice is important. And its easy.

Margheritas knobs are

hidden. Just press them

lightly in the middle to extract

them.

The detergent dispenser with

the additional bleach

compartment is here.

Spin variation

The display indicates the maximum

speed relating to the programme

set, which can be reduced by

pressing the Select button right

down to its total exclusion (Off).

During a wash cycle, the selection

of the spin cycle exclusion is

indicated by symbol

coming

on.

This option is available on all

wash programmes except for

number 11 and Drain.

Wash intensity

This allows you to modify the

characteristics of the selected wash

programme, according to how

soiled the washing is. There are

three levels; press the select button

to Select them.

Low

Medium

High

This option is available on

programmes 1-2-3-5-6-7-8.

Delay timer

This allows you to delay the start

of the wash cycle by a minimum

of 1 to a maximum of 24 hours

by pressing the Select button.

The enabling of the delayed start

is indicated by the symbol

coming on and staying on until

the wash cycle begins.

This option is not available on the

Drain and Spin cycle

programmes.

Stain removal

(see page 35)

Thanks to this command, the

washing machine will carry out a

more intensive wash that optimises

the effectiveness of the liquid

additives, thus allowing more

resistant stains to be removed.

Programme selector knob

To select a programme, you

should turn the knob so that the

symbol/number of the desired

programme is in line with the

pointer on the glass G.

On-off

When button B is pressed, the

washing machine is switched on,

when it is not the machine is

switched off.

Turning the appliance off does

not cancel the selected

programme.

When the appliance is switched

on, all the symbols on the display

light up for at least 8 seconds,

after which only the ones that

can be selected will flash.

Start /Reset

This button allows you to start

the selected wash programme or

to interrupt it.

If you press it briefly, the button

functions as Start, if you press

it for at least 3 seconds, then it

functions as Reset.

After the Start of the appliance,

moving the programme selector

knob will have no effect

whatsoever.

Detergent dispenser

It is divided into three

compartments:

1. Detergent for pre-wash;

2. Detergent for the main cycle

wash;

3. Fabric conditioner.

The washing machine is

equipped with an extra

compartment 4 (provided as an

accessory) for the bleach, to be

inserted in compartment 1.

Programme key

This contains the descriptions of

the wash programmes and the

various functions connected to

the buttons. Pull it outwards to

open it.

Display

All the options available are

displayed on the right-hand side.

Use the Mode button to select

the desired option, and the rela-

tive symbol will begin flashing.

On the left-hand side, the value

or the status (On-Off) of the

selected option is displayed, and

you can modify it using the

Select button.

To access the subsequent option,

press the Mode button,

otherwise press button C (Start/

Reset) to start the wash cycle.

All the options available are

listed below.

Only options relevant to the

selected programme will be

displayed.

Temperature

The display indicates the

maximum temperature relating

to the programme set, which can

be reduced by pressing the

Select button right down to cold

wash (Off).

This option is available on all

wash programmes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston ald 140 ex in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston ald 140 ex Manual

Product: