Manual Hotpoint-Ariston ab 95eu (page 26 of 32) (English, Turkish)

311488

Zoom out

Zoom in

1/32

Model

AB 95

Dimensions

width 59,5 cm

height 85 cm

depth 52,5 cm

Capacity

from 1 to 4,5 kg

Electrical

connections

voltage 220/230 Volt 50 Hz

maximum absorbed power 1850 W

Water

connections

maximum pressure 1 MPa (10 bar)

minimum pressure 0,05 MPa (0,5 bar)

drum capacity 40 litre

Spinning speed

up to 900 rpm

Control programs

in compliance

with IEC

regulation 456

programme 2; temperature 60°C; carried out with 4,5 kg load;

This appliance conforms with the following E.E.C. directives:

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications

TS 2004 EN 60335-2-7

The washing machine

does not drain or spin.

Does the selected

programme foresee water

draining? Some wash cycles

require enabling the draining

manually.

Is the Anti-crease"

function -where provided -

enabled? This function require

enabling the draining

manually.

Is the drain pump clogged?

To check it, close the tap,

unplug the washing machine

and follow the instructions on

page 25, or call for technical

assistance.

Is the drain hose bent? The

tract of the drain hose must be

as straight as possible. Make

sure it is not squashed or bent.

Is the washing machines

drain duct clogged? Is there

an extension of the drain

hose? If so, is it positioned

incorrectly, blocking the water

flow?

The washing machine

vibrates too much

during the spin cycle.

Has the internal floating

unit been correctly

unblocked during

installation? See the

following page on installation

procedures.

Has the washing machine

been levelled correctly? The

levelling of the appliance

should be checked

periodically. In time, the

machine could move

imperceptibly. Adjust the feet

and check them with a level.

Is the appliance closed in

between furniture and a

wall? If it is not a built-in

model, the washing machine

needs to oscillate a bit during

the spin cycle. A few cm of

space should therefore be left

around it.

The washing machine

leaks.

Is the metal ring of the inlet

hose properly attached?

Close the tap, unplug the

appliance and try tightening its

attachment without forcing it.

Is the detergent dispenser

obstructed? Try extracting it

and washing it under tap

water.

Is the drain hose well

attached? Close the tap,

unplug the appliance and try

tightening its attachment.

Too much foam.

Is the detergent appropriate

for machine washing? Check

whether its label reads the

definition for machine wash

or hand and machine wash,

or other similar indications.

Is the correct amount being

used? An excessive amount of

detergent, besides producing

too much foam, does not

guarantee a more effective

wash, and causes scaling in the

internal parts of the appliance.

If, despite all checks, the

washing machine fails to

function and the problem

persists, call your nearest

authorised Customer Service

Centre, providing the following

information:

- the type of malfunctioning

- the model type no. (Mod. ....)

- the serial number (S/N ....)

These indications can be found

on the data plate situated on the

back of the washing machine.

Technical characteristics

Always get

assistance from

authorised

technicians and

always insist on

original spare

parts.

Margherita - Instructions for installation and use

ARGHERITA

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston ab 95eu in the language / languages: English, Turkish as an attachment in your email.

The manual is 1,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston ab 95eu Manual

Product: