Manual Hotpoint-Ariston 4D B-HA (page 17 of 60) (English, German, French, Italian, Polish, Spanish)

69208

Zoom out

Zoom in

1/60

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to

disconnect the appliance from the electricity supply:

1. set the FREEZER OPERATION knob on

2. pull the plug out of the socket

! If this procedure is not followed, the alarm may

sound. This alarm does not indicate a malfunction. To

restore normal operation, it is sufficient to set the

FREEZER OPERATION knob on the desired value. To

disconnect the appliance, follow point 1 and 2.

Cleaning the appliance

 The external and internal parts, as well as the

rubber seals may be cleaned using a sponge that

has been soaked in lukewarm water and

bicarbonate of soda or neutral soap. Do not use

solvents, abrasive products, bleach or ammonia.

 The removable accessories may be soaked in

warm water and soap or dishwashing liquid. Rinse

and dry them carefully.

 The back of the appliance may collect dust which

can be removed by delicately using the hose of a

vacuum cleaner set on medium power. The

appliance must be switched off and the plug must

be pulled out before cleaning the appliance.

 During the cleaning of the slide rails for the drawers

in the freezer compartment, it may happen that the

automatic drawer closure mechanism is

deactivated. To reactivate it, simply close the

drawer a little more forcefully than is usually

necessary.

Avoiding mould and unpleasant odours

 The appliance is manufactured with hygienic

materials which are odour free. In order to maintain

an odour free refrigerator and to prevent the

formation of stains, food must always be covered or

sealed properly.

 If you want to switch the appliance off for an

extended period of time, clean the inside and leave

the doors open.

Holiday function

To minimise energy usage when on holiday, it is not

necessary to switch the appliance off. The appliance

has a function which allows it to maintain the

temperature of the refrigerator compartment at

approximately 15°C (which can also be used to

conserve make-up and beauty products). The freezer

temperature must be set to the minimum value in order

to preserve the food.

To enable the function: set the REFRIGERATOR

OPERATION knob on

A double acoustic signal informs you when it has

been enabled. A single acoustic signal informs you

when it has been disabled.

Optimization Energy Saving function

If you are going on holiday but would like the

operating temperature performance of the product to

remain unchanged, you can use the Optimization

Energy Saving function. This function maximises the

energy saved. It is activated by setting the knobs to I

CARE, then pressing and holding the Super Freeze

button for at least 9 seconds; the Super Freeze

indicator light will begin to flash, signalling the

activation of this function.

The Optimization Energy Saving function may also

be deactivated by pressing the Super Freeze button

again. The corresponding indicator light will stop

flashing, thereby signalling that the original operating

conditions have been restored.

In humid environments, when the Optimization

Energy Saving function is activated, slight

condensation may form on the door of the appliance;

normal operating conditions are restored when the

function is deactivated.

Replacing the light bulb

To replace the light bulb in the refrigerator

compartment, pull out the plug from the electrical

socket. Follow the

instructions below.

Access the light bulb by

removing the cover as

indicated in the

diagram.

Replace it with a similar

light bulb within the

power range indicated

on the cover (15 W).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hotpoint-Ariston 4D B-HA in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 3,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hotpoint-Ariston 4D B-HA Manual

Product: