624652

Hot Spring SOVEREIGN - II Manual

17
Zoom out
Zoom in
Previous page
1/48
Next page
Page 14
Home Screen Features - Continued
Music
If installed, press this icon to access
the first Music screen.
Lights
Press this icon to access the first
Lights screens.
Status Indicators
Summer Timer
This indicator is on whenever the
Summer Timer is ON
Spa/Temp Lock This indicator is on whenever the
Spa Lock or Temperature Lock is ON.
Battery Life
This indicator tells you how much
battery life is still available to the
wireless remote control.
Battery
Charging
A flashing indicator tells you when
the battery is charging in the dock.
When indicator is solid, battery is
charged.
Working Screen Icons
Home Icon
Press to return to the Home screen.
or
Return Icon
Press to return to the previous
screen.
Advance Icon
Press to advance to the next
screen.
TEMPERATURE CONTROL
Press the actual temperature on Home screen to
display Set Temperature screen.
The set temperature range is from
80°F to 104°F (26°C to 40°C).
NOTE: The water temperature may
vary depending on the current use
and condition of your spa and outside
temperatures.
The factory set temperature of the spa water is 100°F (38°C).
After the spa has been used, the last temperature value set by the user
will be stored in memory. If power is disconnected from the spa, it will
automatically revert to the last set temperature when power is reapplied.
Press to raise set temperature of spa. Press and hold to
raise the temperature continuously.
Press to lower set temperature of spa. Press and hold to
lower the temperature continuously.
MEMORY SCREEN
Press on Home screen to display Memory screen.
Press to activate the last saved set of operating
functions.
Press to save the current set of operating
functions (jets and lights only).
Press to return to home screen if neither of the
above buttons are used. Screen will automatically
revert back after 10 seconds of non activity.
CLEAN CYCLE SCREEN
Press on Home screen to display Clean Cycle screen.
Provided as a convenient timer
for manually adding water care
chemicals (see How to Add
Chemicals section). Activates jet
pump 1 on high speed for a ten
minute period.
Press to begin the Clean Cycle. The screen will
briefly display CLEAN CYCLE: ACTIVE
Press to return to Home screen if START is not
pressed. Screen will automatically revert back
after 10 seconds of non activity.
SETTINGS SCREENS
Press on Home screen to display first Settings Screen.
The first Settings screen allows
you to turn Temperature Lock,
Spa Lock, and Summer Timer On
or Off.
Operating Instructions
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hot Spring SOVEREIGN - II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hot Spring SOVEREIGN - II in the language / languages: English as an attachment in your email.

The manual is 6,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info