Manual Hortensus RG800 (page 73 of 90) (English, German, Dutch, French)

764141

Zoom out

Zoom in

1/90

H) After all the fence line is fixed, reserve10-15cm terminals respectively for both front and

tail ends. Strip the terminal store veal the copper lines for 2-3cm (Fig. A). Remove the nuts,

fasten the copper lines on copper conductors. Then tighten the nuts (Fig. B).Front tail con-

nect with the red pole, rear tail connect with the black pole. When the charger is connected

to the charging station and the fence line starts to operate, the red lamp should be off.

Note: Do not fold or repeat wiring with the rest fence line. Cut it instead (Fig. C)

Mowing Height:

The mowing height can be adjusted from 2.5cm to 5.5cm by adjusting knob beside the

display panel.

Note: Make sure that the power is off before operation.

To protect the charging station from hitting by the mower, please put the fence line like

below:

Fig. A Fig. B Fig. C

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus RG800 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 12,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hortensus RG800 Manual

Product: