Manual Hortensus MOTTER 500 (page 52 of 55) (English, German, Dutch, French)

764145

Zoom out

Zoom in

1/55

Manually extending and retracting the awning

Insert the crank handle in the loop (drawing 8).

Turn the crank handle clockwise to extend the awning.

Turn the crank handle counterclockwise to retract the awning.

To avoid damage to the fabric, the awning fabric must always be

properly rolled up.

The awning is intended as a protection against the sun only. It is not

to be used during periods of strong wind, rain, hail, or snow. In case of such

conditions, retract the awning immediately.

Take away the remote control after adjusting the awning as you wish

and put it in a place that is not reachable for children to avoid that

they play with the awning.

Never allow children to play with the awning.

Be sure the fabric is tensioned. If the fabric is not tensioned during

extension, turn counterclockwise until the fabric is tensioned.

Do not put any objects or body parts (e.g. hands) in the awning while

extending and retracting. Hazard of crush!

When the front bar touches the roller, as shown in following figure during

retraction, don’t try to make them closer, otherwise the product might be

damaged.

General notes of the awning fabric

Awning fabrics are high-performance products. Nevertheless, even given today's state

of the art and the requirements imposed by environmental protection, there are limits

to perfection. Certain appearances in the fabric that are sometimes objected to are still

possible despite sophisticated production and processing technology.

Basically, these effects occur to different degrees in almost all awning fabrics. They do

not decrease the quality of the fabrics in any way, however.

To avoid irritation, we would like to expressly draw your attention to the following

characteristics in terms of consumer education:

Creases are created during fabrication and when folding the awning fabric. In the

course of this process, especially in lighter colors, surface effects can be created

in the crease (pigment displacements), which appear darker with backlight (like

stripe of dirt). They do not decrease the value or the performance of the awning.

Chalk effects are light stripes that are created when processing refined goods and

cannot be totally avoided even with the greatest of care. Thus, they also do not

constitute a reason for complaint.

Rain impermeability: Acrylic and polyester sun protection awning materials are

impregnated with water-repellents and at a minimum tilt of 14 degrees will

withstand a light, short rain. In stronger or longer rain, awnings must be retracted

to avoid damage. Awnings that are rolled up wet should be extended again as

soon as possible for drying.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus MOTTER 500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 23,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hortensus MOTTER 500 Manual

Product: