764145
48
Zoom out
Zoom in
Previous page
1/55
Next page
Drawing 4:
Insert the anchor into the drilled hole
as shown in picture on the right.
Step 5: Fix the brackets
Place the bracket on the screw protruding from the wall. Then add flat washer and
spring washer and fix the bracket with lock nuts. Tighten them well.
Drawing 5:
The bracket has been prepared to be
fixed on a wall. Choose the hole you
need to fix it according to drawing.
Step 6: Install the awning
After all brackets have been mounted properly you can fix the awning. At least
three ladders are required to install the awning in order to obtain the required
height. Ensure that the ladders are firmly resting on the ground so that you
cannot fall. Only use ladders that are suitable for such assembly work. Insert
the awning into brackets as shown in the drawing below. Then immediately
insert the safety screw and fix it with lock nut. Attachment brackets for wall
installation:
Firmly tighten the bolts with a 17mm wrench: it is best to use a wrench with
a closed end rather than an open end because this will avoid damage to
the nut if it should slip.
As soon as they are fully inserted, the brackets must sit firmly in the wall. If
they are still moving in any form, you must further tighten them. Ensure
that the wall brackets are screwed firmly to the wall, so that they can
in no case tear out when the awning is installed.
Do not try to secure the wall brackets to loose wall stones or any
surfaces that are not absolutely firm.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hortensus MOTTER 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus MOTTER 500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 23,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info