764143

Hortensus MOTTER 300 Manual

45
Zoom out
Zoom in
Previous page
1/55
Next page
alone. If the awning falls, it could cause serious injuries and damages!
Contact an authorized assembler for help.
Do not install the awning when you find that parts are damaged or
missing.
Do not allow children to play in the working area during assembly and
adjustments.
This product is only suitable for installation on a solid masonry or
concrete wall or ceiling.
Nobody is allowed to change the products’ design and structure without
the permission of manufacturer or authorized deputy.
Please make sure that your hands are clean at the time of the assembly;
otherwise you may soil the awning fabric and frame.
Operation in frosty conditions may damage the awning.
Operation in snowy conditions may damage the awning.
In case of rain, retract the awning if pitch angle is less than 14°.
Nobody is allowed to climb onto the awning; hanging anything on the
awning is forbidden.
Sheeting was used to protect the paint. This must be removed afterwards.
When extended, various forces, including wind and rain, will affect an awning.
These sometimes substantial forces must be absorbed by the awning and
transferred to the assembled structure via its mounting brackets. Under
extreme loads, excessive attractive force can be exerted on the anchor bolts.
Therefore, before starting assembly, check the load-bearing capacity of the
mounting base and if necessary take corresponding measures to ensure
stable installation of the brackets. If the mounting base is unstable, you may
wish to consult a specialist in your vicinity.
The awnings are intended as a protection against the sun only. It is not
to be used during periods of strong wind, rain, hail, or snow. In case of
such conditions, retract the awning immediately.
Preparation
Carefully remove the awning from the box and remove the styrofoam protectors from
the awning. Remove the plastic bags and plastic guards from the awning and carefully
place the awning aside to avoid having it damaged by scratches or otherwise damaged
or soiled during assembly. Check the number of parts in the packaging and on the
packing list, check if all parts are included and if the quality is good. If you would have
any questions, please contact the supplier.
Be aware that the extension part may pop out during unpacking.
Drill
Masonry drill bit, 14 mm
Spirit level
Allen wrench CR-V5mm and CR-V6mm
Tools needed for assembly:
4
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hortensus MOTTER 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hortensus MOTTER 300 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 23,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info