808808
6
Zoom out
Zoom in
Previous page
1/8
Next page
6
Setting the On and Off Times
To alter these settings please proceed as follows:-
The default time settings shown above are preset at the factory
NB. The factory default settings for the 2nd ON/OFF times are both set at 12:00pm
(midday) which cancels this ‘ON’ period giving 2 ON/OFF periods for the day. If a midday
‘ON’ period is required set the 2nd ON and OFF times accordingly. If not press ENTER twice.
Press the
SET button
until SET
indicator is
next to HW
or CH PROG
position
Repeat this
process for
2nd and 3rd
settings
Use the PLUS and MINUS buttons to
select day required and press COPY.
‘IN’ is displayed to confirm the copy.
Repeat for other days as required
Press ENTER. Use the plus and minus
buttons to select the day required
and press ENTER. Set 1st, 2nd and
3rd times as before. To repeat for
other days go to 2, to copy go to 1
To transfer to independent times
for other days go to 2 or to finish
programming press the SET button
until the SET indicator is in the RUN
position
To finish programming press the SET
button until the SET indicator is in
the RUN position
Use PLUS
and
MINUS
buttons
to adjust
day
Use PLUS
and
MINUS
buttons
to adjust
1st ON
time
Enter the 3rd
OFF time and
the word COPY
is displayed
To set independent
times for other
days go to 2
To follow the copy
route and repeat all
programmed times for
another day go to 1
Use PLUS
and
MINUS
buttons
to adjust
1st OFF
time
Press
ENTER
Press
ENTER
Press
ENTER
1
2
1st ON 1st OFF 2nd ON 2nd OFF 3rd ON 3rd OFF
6.30AM 8.30AM 12.00PM 12.00PM 4.30PM 10.30PM
DEFAULT TIME SETTINGS
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horstmann CentaurPlus C27 Series 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horstmann CentaurPlus C27 Series 2 in the language / languages: English as an attachment in your email.

The manual is 0.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horstmann CentaurPlus C27 Series 2

Horstmann CentaurPlus C27 Series 2 Installation Guide - English - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info