538750
5
Zoom out
Zoom in
Previous page
1/52
Next page
Surface
The door surface is furnished with a wet paint coating or a
foil-coating. Thiscoating provides the door surface with
the following properties:
ō Corrosion protection
ō Colour fastness
ō Protection from environmental influences
Varnishing the surface (Repainting non-foil-coated
surfaces):
1. Sand the surface.
2. Clean the sanded surface thoroughly.
3. Apply 2K-PUR paint finish or 2K-EPOXY etch primer
directly and paint with conventional synthetic resin
paints.
ATTENTION
Unsuitable care products
The door surface and adjacent components can be
damaged by aggressive, corrosive or abrasive materials
such as acids or steel brushes.
Only use conventional care products, as well as soft
cloths or towels, to maintain the entrance door.
Always take note of the manufacturer information for
the care products.
Care information for stainless steel handles and
embellishments
You have purchased a high-grade stainless steel product.
Protect it by cleaning and maintaining it regularly. This is
the only way to prevent corrosion caused by environmental
influences and contamination related to use. Surface rust
is thus not a reason for complaint! For the care of the
stainless steel we recommend our special care product,
which you can purchase from your specialised retailer.
Alternately, you can use commercially available stainless
steel care products. Please do not use aggressive,
corrosive or abrasive materials such as acids or steel
brushes, which can damage the surface of the stainless
steel or adjacent components. For that reason, always take
note of the manufacturer information of the care products.
Oil or lubricate movable fitting parts once a year.
Onlyuse acid-free oil or vaseline.
Under certain climatic conditions condensation may
appear on the element.
FR
FRANÇAIS
A propos de ce mode d’emploi
Cette notice se compose d’une partie texte et d’une partie
illustrée. Vous trouverez cette dernière à la fin de la partie
texte.
Lisez attentivement et suivez les présentes instructions.
Elles contiennent des informations importantes concernant
le produit. Veuillez en particulier respecter toutes les
consignes de sécurité et de danger.
Conservez précieusement les présentes instructions!
Consignes de sécurité utilisées
ATTENTION
Désigne un danger susceptible d’endommager ou de
détruire le produit.
Détermination de la position de la porte
La position de la porte doit être déterminée en fonction des
possibilités de fixation locales, du type de mur et des
écarts nécessaires par rapport aux bords des chevilles et
des axes de celles-ci. Positionnez la porte, dans la mesure
du possible, de telle manière qu’elle affleure le mur au
niveau de l’isolation. En cas de maçonnerie monolithique
ou à simple paroi, positionnez la porte le plus proche
possible de la paroi intérieure du bâtiment. Le processus
isotherme ne doit être ni altéré ni interrompu. La porte doit
être positionnée de sorte à éviter tout pont thermique dans
les raccords muraux.
Fixation à la construction
1. L’espace entre le cadre de porte et la maçonnerie doit
être rempli de matériaux isolants (par exemple laine de
verre ou laine de roche).
2. Compression de la ganse.
3. Scellage du joint intérieur pour éviter la diffusion
de vapeur.
4. Réalisez le joint extérieur avec des bandes
précomprimées pour permettre la diffusion de vapeur.
Exécution de surface
La surface de porte est munie d’un revêtement en vernis
trempé ou d’un revêtement de feuil. Ce revêtement confère
les propriétés suivantes à la surface de la porte:
ō Protection anticorrosion
ō Résistance à la décoloration
ō Protection contre les influences environnementales
Laquer la surface (Nouveau vernissage sur des
surfaces à revêtement en vernis trempé):
1. Poncer la surface.
2. Nettoyer minutieusement la surface poncée.
3. Appliquez directement une laque de finition à 2
composants PUR ou une couche passivante à 2
composants EPOXI – puis une laque synthétique
ducommerce.
ATTENTION
Produits d’entretien inappropriés
La surface de la porte ou les éléments de constructions
voisins peuvent être endommagés par des brosses
métalliques ou des substances agressives, caustiques ou
décapantes telles que des acides.
Pour l’entretien de votre porte d’entrée, utilisez
uniquement des produits d’entretien disponibles
dans le commerce ainsi que des chiffons doux ou
des tissus.
Pour chaque produit d’entretien, veuillez toujours
vous conformer aux instructions du fabricant.
Conseils d’entretien pour poignées et parements
en acier inoxydable
Vous venez de faire l’acquisition d’un produit de grande
qualité en acier inoxydable. Protégez-le par un entretien
régulier ! De cette manière, vous préviendrez l’apparition
631087 / 04.2014
5
THERMOPRO / MZ THERMO / KSI THERMO
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann ThermoPro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann ThermoPro in the language / languages: All languages as an attachment in your email.

The manual is 10,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hormann ThermoPro

Hormann ThermoPro User Manual - English, German, French, Spanish - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info