538730

Hormann Schuifhekaandrijving Manual

33
Zoom out
Zoom in
Previous page
1/132
Next page
Error acknowledgement10.2
If an error occurs, this can be acknowledged, provided the
error is no longer present.
On pressing the internal or external impulse generator, f
the error is deleted and the gate travels in the
corresponding direction.
Dismantling and Disposal11
Have the sliding gate operator dismantled and disposed of by
a specialist.
Optional Accessories12
Optional accessories are not included in the scope of delivery.
Loading of the operator by all electrical accessories: max.
100 mA.
The following accessories are available:
External radio receivers•
External impulse button, e.g. key switch•
External code and transponder switches•
One-way photocell•
Warning lamp/warning light•
Photocell expander•
Warranty Conditions13
Warranty
We shall be exempt from our warranty obligations and
product liability in the event that the customer carries out his
own structural alterations or undertakes improper installation
work or arranges for same to be carried out by others without
our prior approval and contrary to the installation guidelines
we have provided. Moreover, we shall accept no responsibility
for the inadvertent or negligent use of the operator or
improper maintenance of the gate and the accessories nor for
a non-authorized method of installing the gate. Batteries are
also not covered by the warranty.
Warranty period
In addition to the statutory warranty provided by the dealer in
the sales contract, we grant the following warranty for parts
from the date of purchase:
5 years for the operator mechanics, motor, and motor •
control
2 years on radio equipment, impulse generator, •
accessories and special systems
There is no warranty on consumables (e.g. fuses, batteries,
lamps). Claims made under the warranty do not extend the
warranty period. For replacement parts and repairs the
warranty period is six months or at least the remainder of the
warranty period.
Prerequisites
A claim under this warranty is only valid for the country in
which the equipment was bought. The product must have
been purchased through our authorised distribution channels.
A claim under this warranty exists only for damage to the
object of the contract itself. Reimbursement of expenditure
for dismantling and installation, testing of corresponding
parts, as well as demands for lost profits and compensation
for damages, are excluded from the warranty. The receipt of
purchase substantiates your right to claim under the warranty.
Performance
For the duration of the warranty we shall eliminate any
product defects that are proven to be attributable to a
material or manufacturing fault. We pledge to replace free of
charge and at our discretion the defective goods with non-
defective goods, to carry out repairs, or to grant a price
reduction.
Damages caused by the following are excluded:
improper fitting and connection,•
improper initial start-up and operation,•
external factors such as fire, water, abnormal •
environmental conditions,
mechanical damage caused by accidents, falls, impacts,•
negligent or intentional destruction,•
normal wear or deficient maintenance,•
repairs conducted by unqualified persons,•
use of non-original parts,•
removal or defacing of the type plate•
Replaced parts become our property.
Technical data14
Max. gate width: 6,000 mm/8,000 mm
depending on operator type
Max. gate height: 2,000 mm
Max. gate weight: 300 kg/500 kg depending on
operator type
Rated load: See type plate
Max. pull and push force: See type plate
Operator housing: Die-cast zinc and weather-
resistant, glass-fibre reinforced
plastic
Mains voltage: Rated voltage 230 V/50 Hz
Max. power input 0.15 kW
Control: Microprocessor control
system, programmable via 12
DIL switches, control voltage
24 V DC
Operating mode: S2, short-time duty 4 minutes
Temperature range: -20°C to +60°C
Travel/force limit: Electronic
Automatic safety cut-out: Force limit for both operational
directions, self-programming
and testing
Hold-open phase: 60 seconds (photocell •
required)
5 seconds (shorter hold-•
open phase with through-
traffic photocell)
Motor: Spindle unit with 24 V DC
motor and worm gears,
protection category IP 44
Radio remote control: 2-channel receiver,
hand transmitter
TR10A059-C RE / 10.2008 33
ENGLISH
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Schuifhekaandrijving at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Schuifhekaandrijving in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info