646888

Hormann Liftronic 700 Manual

19
Zoom out
Zoom in
Previous page
1/132
Next page
C
1
Extended fitting bracket
If the clearance between the highest point of the door and the ceiling is less than
30mm, the garage door operator can also be mounted behind the opened door if
enough space is available. In the following cases, an extended fitting bracket must
be used:
– for a lintel with offset of 1,000mm
– for sectional doors (N tracks) up to 2,375 mm high
– for sectional doors (L or Z tracks) up to 2,250 mm high
– for up-and-over doors up to 2,750 mm high
C
2
Fitting bracket for sectional doors
For doors of other makes
C
3
Hand transmitter RSC2 (including hand transmitter holder)
This hand transmitter works with a rolling code (frequency: 433MHz) that changes
with each sending procedure. The hand transmitter is equipped with two buttons, i.e.
you can use the second button to open another door or turn on the outdoor lights if
there is an optional receiver for it.
C
4
Hand transmitter RSZ1
This hand transmitter fits in a vehicle cigarette lighter. The hand transmitter works
with a rolling code (frequency: 433MHz) that changes with each sending procedure.
C
5
Internal push button PB3
The internal push button can be used to conveniently open and close your door from
within the garage, turn on the light and block radio control.
Including a 7m connecting lead (2-wire) and fixing material.
C
6
Radio code switch RCT3b
Up to 3 door operators can be wirelessly operated via impulse using the illuminated
radio code switch. This does away with the time-consuming need to lay cables.
C
7
Surface-mounted / recessed key switch
You can use the key switch to operate the garage door operator from the outside
with a key. Two versions in one device – surface-mounted or recessed.
C
8
S
ilca
LS 11
S
ilca
LS 11
Emergency release lock NET3
Necessary for garages without a second entrance.
– Bore Ø 13mm
– Cable length 1.5m
TR10L006-C RE / 11.2013 19
ENGLISH
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann Liftronic 700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann Liftronic 700 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 12,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info