538739
4
Zoom out
Zoom in
Previous page
1/56
Next page
Dear Customer,
We thank you for choosing a quality product from our
company.
1 About this document
Read through all of the instructions carefully, as they
contain important information about the product.
Payattention to and follow the instructions provided,
particularly the safety instructions and warnings.
2 Safety instructions
2.1 Intended use
The HSP4BiSecur is a unidirectional transmitter for
operators and their accessories. It can be operated with
both the BiSecur radio and the fixed code 868MHz.
Other types of application are prohibited. The manufacturer
is not liable for damage caused by improper use or
incorrect operation.
2.2 Safety instructions for operating the
hand transmitter
WARNING
Danger of injury during door travel
Persons may be injured by door travel if the hand
transmitter is actuated.
Make sure that the hand transmitters are kept away
from children and can only be used by people who
have been instructed on how the remote-control
door functions!
If the door has only one safety device, only operate
the hand transmitter if you are within sight of the
door!
Only drive or pass through remote control door
systems if the door is in the Open end-of-travel
position!
Never stand in the door’s area of travel.
Please note that unwanted door travel may occur if a
hand transmitter button is accidentally pressed
(e.g.if stored in a pocket / handbag).
CAUTION
Danger of injuries due to unintended door travel
See warning in section5
ATTENTION
Functional disturbances caused by environmental
conditions
Non-compliance with these instructions can impair
function!
Protect the hand transmitter from the following
conditions:
• Direct sunlight (permissible ambient temperature:
0°C to +60°C)
• Moisture
• Dust
NOTES:
• If there is no separate garage entrance, perform all
programming changes and extensions of radio
systems from inside the garage.
• After programming or extending the radio system,
check the functions.
• Only use original components when putting the radio
system into service or extending it.
• Local conditions may affect the range of the radio
system.
• When used at the same time, GSM900 mobile phones
can affect the range.
3 Setting the fixed code 868MHz
All radio codes are newly assigned by the following steps.
1. Open the battery compartment and remove the battery
for 10 seconds.
2. Press a hand transmitter button and keep it pressed.
3. Insert the battery and close the battery compartment.
The LED slowly flashes in blue for 4 seconds.
The LED flashes rapidly in blue for 2 seconds.
The LED is illuminated blue for a long time.
4. Keep the hand transmitter button pressed.
The LED slowly flashes in red for 4 seconds.
The LED flashes rapidly in red for 2 seconds.
The LED is illuminated red for a long time.
Fixed code 868MHz is activated.
NOTE:
If the hand transmitter button is released prematurely,
theBiSecur radio will remain active.
4 Operation
Each hand transmitter button is assigned to a radio code.
Press the button of the hand transmitter whose radio code
you want to transmit.
The LED lights up red and the radio code is
transmitted.
NOTE:
If the battery is almost empty, the LED flashes red twice
a. before transmitting the radio code.
The battery should be replaced soon.
b. and the radio code is not transmitted.
The battery must be replaced immediately.
4
TR22A004-B RE / 12.2013
ENGLISH
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hormann HSP 4 BiSecur at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hormann HSP 4 BiSecur in the language / languages: All languages as an attachment in your email.

The manual is 3,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hormann HSP 4 BiSecur

Hormann HSP 4 BiSecur User Manual - English, German, Dutch, French, Italian, Portuguese, Spanish - 88 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info