Manual Hormann HSE 2 BiSecur (page 22 of 84) (English, German, Dutch, French, Italian, Portuguese, Spanish)

538741

Zoom out

Zoom in

1/84

Reset8

Each hand transmitter button is assigned to a new

radio code by means of the following steps.

Open the hand transmitter housing and remove 1.

the battery for 10 seconds (see section 5.1).

Press a circuit board button and keep it pressed.2.

Insert the battery.3.

The LED slowly ﬂashes in blue for 4 seconds.–

The LED ﬂashes rapidly in blue for 2 seconds.–

The LED is illuminated blue for a long time.–

Release the circuit board button.4.

All radio codes are newly assigned.

Close the hand transmitter housing.5.

NOTE:

If the circuit board button is released prematurely, no

new radio codes are assigned.

Set the ﬁxed code 868 MHz.8.1

If immediately following the device reset, the circuit

board button remains pressed, the ﬁxed code

868 MHz will be activated.

The LED slowly ﬂashes in red for 4 seconds.–

The LED ﬂashes rapidly in red for 2 seconds.–

The LED is illuminated red for a long time.–

All radio codes are newly assigned.

NOTE:

If the hand transmitter button is released prematurely,

the BiSecur radio will remain active.

Further information about operating the hand

transmitter with the ﬁxed code 868 MHz can be found

on the Internet at www.hoermann.com

22 TR20A092-B RE / 04.2013

ENGLISH

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hormann HSE 2 BiSecur in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hormann HSE 2 BiSecur Manual

Product: