606946

Horizon Hobby Spektrum DX6 Transmitter Manual

39
Zoom out
Zoom in
Previous page
1/46
Next page
39SPEKTRUM DX6 • TRANSMITTER INSTRUCTION MANUAL
EN


Aileron to Rudder
TheAilerontoRuddermixiscommonlyusedforcoordinated
turns. When active, as aileron is applied the rudder moves in
the same direction as the turn (right aileron input results in right
rudder output). If you assign the flight mode to a switch, a Sub
Switch option allows you to assign an additional switch to activate
upto3AilerontoRuddermixesforthatightmode.
Aileron to Flap
TheAilerontoFlapmixallowstheentiretrailingedgeofthewing
(aileron and flap) to operate as ailerons. When active, as aileron is
applied the flaps also move. Always program the flaps to move in
the same direction as the turn (so that right aileron is equivalent to
flaps moving as right ailerons).
Elevator to Flap
ElevatortoFlapmixcreatesadditionallift,allowingatighterturn.
The entire trailing edge of the wing (aileron and flap) operates
as flaps (camber increase) when you apply elevator. An offset is
provided, which is typically used for Snap Flaps. With Snap Flap,
noElevatortoFlapmixoccursuntiltheoffsetvalueisreached.
Typically, this offset is at 70% up elevator so that beyond 70%
thedownapmixcomesin,providingadditionalliftformore
aggressive turning (for tight thermals or racing turns).
Flap to Elevator
FlaptoElevatormixpreventspitchuptendencythatoccurswhen
youapplyCroworButtery.Thismixistypicallyusedonlywiththe
CamberSystem.TheFlaptoElevatormixoperatesasacurveso
that the elevator moves down the most during the first 20% of flap
deployment,decreasesoverthenext40%,thenremainsthesame
from 60 to 100% of flap travel.
For sailplanes with ailerons/tips/flaps, make sure an appropriate
Sailplane Type is selected so that tips appear in the transmitter as
RAIL and LAIL. Decrease or increase travel on the tip ailerons by
creatinganAIL>RAILmix.
SAIL Mixing
Foreachofthesemixes,youcanprogrameachightmodewithdifferentmixvaluesorat0%ifnomixisdesiredforthatspecicight
mode. Programming values include independent control of the direction and amount a slave surface moves in relationship to the master
surface.
V-Tail Differential
The V-Tail Differential screen enables you to increase or decrease
the amount of differential between control surface throws.
Positive Differential values decrease the amount of “down” travel
without affecting the “up” travel on the opposite control surface.
Negative Differential values decrease the amount of “up” travel
without affecting the amount of “down” travel on the opposite
control surface.
The V-Tail Differential menu option only appears when V-Tail A or
V-Tail B is active in Aircraft Type.
To adjust the V-Tail Differential:
1. Scroll to Switch and press the scroll wheel. Scroll right to
selectOn(Differentialisalwayson)orassignthedifferentialto
a switch position.
2. Press the scroll wheel a second time to save the selection.
3. Scroll to Diff: and press the scroll wheel once to change the value.
4. Press the scroll wheel again to save the selection.
SAIL (SAILPLANE)
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby Spektrum DX6 Transmitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby Spektrum DX6 Transmitter in the language / languages: English as an attachment in your email.

The manual is 15,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby Spektrum DX6 Transmitter

Horizon Hobby Spektrum DX6 Transmitter User Manual - German - 44 pages

Horizon Hobby Spektrum DX6 Transmitter User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info