Manual Horizon Hobby DX7 - 7 Channel DSMX Transmitter (page 34 of 50) (English)

606949

Zoom out

Zoom in

1/50

34 SPEKTRUM DX7 • TRANSMITTER INSTRUCTION MANUAL

Back Mixing applies a mix to all related servos in a wing or tail

type. For example, if you select 2 AIL, 2 FLAP in the Aircraft Type

screen, a mix to one aileron channel affects both aileron servos.

The mix response, however, depends on the aileron channel

included in the mix.

A Back Mix also enables you to use fewer mixes to achieve the

desired response, for example adding roll to a split elevator.

The Range Test function reduces the power output. This allows for

a range test to conﬁ rm the RF link is operating correctly. Perform

a range check at the beginning of each ﬂ ying session to conﬁ rm

system operation.

To Access the Range Test screen:

1. With the transmitter on and the main or telemetry screen

displayed, press the scroll wheel. The Function list displays.

2. Scroll to highlight Range Test, then press the scroll wheel to

access the Range Test function.

3. With the Range Test screen displayed, push and hold the

trainer button. The screen displays Reduced Power. In this

mode the RF output is reduced allowing for an operational

range test of your system.

4. If you let go of the trainer button, the transmitter will go back

to Full Power.

IMPORTANT: Telemetry alarms are disabled during the

Range Test.

Range Testing the DX7

1. With the model restrained on the ground, stand 30 paces

(approx. 90 feet/28 meters) away from the model.

2. Face the model with the transmitter in your normal ﬂ ying

position and place the transmitter into Range Test mode (see

above). Then push the trainer button; the power output will be

reduced.

3. Operate the controls. You should have total control of your

model with the transmitter in Range Test mode.

4. If control issues occur, contact the appropriate Horizon Product

Support ofﬁ ce for assistance.

5. If performing a range test while a telemetry module is active,

the display will show ﬂ ight log data.

The DX7 Timer function allows you to program a countdown timer

or stop watch (count up timer) to display on the main screen. An

alarm sounds when the programmed time is reached. You can

program the timer to start using the assigned switch position or

automatically when throttle is raised above a programmed position.

Two internal timers are available that show run time for a speciﬁ c

model displays on the Main Screen. A total system timer is also

available.

Press NEXT to select the Timer Event Alerts settings. These

include options for the alerts at every minute for down timers, 1

minute remaining alert, 30 seconds remaining alert, 10 second

to 1 second remining alerts, expiration alert, and every minute up

alert. Press NEXT again to select the Timer Control Alerts settings.

Available options include Timer Start alert, Timer Stop alert, and

Timer Reset alert.

FUNCTION LIST

Back Mixing

Range Test

Timer



Timer Event and Timer Control Alerts

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby DX7 - 7 Channel DSMX Transmitter in the language / languages: English as an attachment in your email.

The manual is 4,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby DX7 - 7 Channel DSMX Transmitter

Horizon Hobby DX7 - 7 Channel DSMX Transmitter User Manual - German - 49 pages

Horizon Hobby DX7 - 7 Channel DSMX Transmitter User Manual - French - 50 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Horizon Hobby DX7 - 7 Channel DSMX Transmitter Manual

Product: