606951

Horizon Hobby DX4C Transmitter Manual

7
Zoom out
Zoom in
Previous page
1/21
Next page
7
Spektrum DX4C • tranSmitter inStruCtion manual
EN
Steering Servo
ELECTRIC VEHICLE INSTALLATION NITRO VEHICLE INSTALLATION
Electronic
Speed
Control
To Motor
Receiver
Receiver
Steering Servo
Throttle Servo
Battery
Battery
SRS410 FAILSAFE
The throttle failsafe position is set during binding. In the unlikely
event that the radio link is lost during use, the receiver will drive
the the throttle servo to its pre-programmed failsafe position
(normally full brakes) and all other channels will have no servo
output. If the receiver is turned on prior to turning on the trans-
mitter, the receiver will enter the failsafe mode, driving the the
throttle servo to its preset failsafe position. When the transmitter
is turned on, normal control is resumed.
IMPORTANT: Failsafe activates only in the event that signal
is lost from the transmitter. Failsafe will NOT activate in
the event that receiver battery power decreases below the
recommended minimums or power to the receiver is lost.
SRS4210 FAILSAFE
In the unlikely event that the radio link is lost during use, the
receiver will drive the throttle channel to the neutral position. If
the receiver is powered on prior to turning on the transmitter, the
receiver will enter the failsafe mode, driving the throttle channel
to the neutral position. When the transmitter is turned on, normal
control is resumed.
IMPORTANT: Failsafe activates only in the event that signal
is lost from the transmitter. Failsafe will NOT activate in
the event that receiver battery power decreases below the
recommended minimums or power to the receiver is lost.
SRS4210 Receiver Connection
and Installation
You must install the receiver in the vehicle before binding the
transmitter and receiver. The receiver can be mounted flat with
the label up or on its side. When you bind the receiver, the AVC
system automatically detects the orientation of the receiver. The
receiver must be mounted completely flat when in the label-up
orientation or completely perpendicular when mounted on its
side. If the receiver is angled even slightly, AVC may not function
properly. If the orientation of the receiver is changed after
binding, you must then rebind for AVC to function properly.
Install the Receiver in your vehicle using the included double-
sided foam servo tape. Foam servo tape will hold the receiver in
place and help isolate it from vibrations.
IMPORTANT: Do not use hook & loop material to install the
SRS4210 receiver. Using hook & loop material will affect the
performance of the AVC system.
Mount the antenna up and away from the vehicle in an antenna
tube. The higher up the antenna is, the better signal it will
receive.
SR410 Receiver Installation
Install the receiver in your vehicle using double-sided foam
servo tape. Foam servo tape holds the receiver in place and
protects the receiver from vibration. Position the antenna
vertically and away from the vehicle in an antenna tube. The
SR410 and SRS4210 have a coax-style antenna. The last 31mm
of the antenna is the portion that receives the signal from the
transmitter.
CAUTION: Do not cut or bend the antenna. Doing so
could damage the antenna, resulting in the loss of
vehicle control.
Mount the antenna up and away from the vehicle in an antenna
tube. The higher up the antenna is, the better signal it will
receive.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby DX4C Transmitter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby DX4C Transmitter in the language / languages: English as an attachment in your email.

The manual is 7,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby DX4C Transmitter

Horizon Hobby DX4C Transmitter User Manual - German - 21 pages

Horizon Hobby DX4C Transmitter User Manual - French - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info