606952
5
Zoom out
Zoom in
Previous page
1/13
Next page
EN
5
Normal Remote Receiver Failsafe
In this mode the remote receiver output from the AR7700 operates like any
normal remote receiver in that it will not send failsafe commands. This requires
the host device to be able to detect a failsafe condition and configure failsafe
operation. If your want to operate your system in this mode, leave the bind plug
in during the bind procedure. Always remove the bind plug before subsequent
power cycles or you will have to re-bind.
Preset Failsafe
When the transmitter and receiver are turned on, the receiver connects to the
transmitter and normal control of all channels occurs. If loss of signal occurs, the
failsafe function moves all control outputs to preset positions that were set during
binding. When the receiver detects signal from the transmitter, normal aircraft
operation resumes.
Setting the Failsafe Positions
During the binding process the stick and switch positions will be set as the
preset failsafe positions.
1. Insert the bind plug in the bind port before powering on the reciever.
2. Power on the receiver. A flashing orange LED indicates the receiver is in Bind
mode.
3. Unplug the bind plug before binding.
4. Power on your transmitter with the bind button depressed and the sticks and
switches in the desired failsafe positions.
PPM Output
This mode connects with flight control systems that accept a PPM data stream.
This protocol is widely available in many flight controllers, but is not as fast or
offer as many channels, Remote Receiver Output or SRXL.
SRXL output
SRXL is a high speed digital protocol that compares favorably with remote
receiver output. If your flight control system offers SRXL, this option is preferred
over PPM for its high speed performance.
Remote Receiver Output
Remote receiver output requires normal 3.5-9.6V power to be supplied to the
AR7700. The AR7700 cannot operate from the power supply normally available
to power a single remote receiver directly.
The Remote Receiver output available on the AR7700 connects to flight control
systems that accept a Spektrum remote receiver. Do not connect the remote
output to the remote receiver port on a conventional Spektrum receiver.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7700 Receiver at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7700 Receiver in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7700 Receiver

Horizon Hobby AR7700 Receiver User Manual - German - 12 pages

Horizon Hobby AR7700 Receiver User Manual - French - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info