Manual Horizon Hobby AR7210BX - BeastX (page 13 of 59) (English)

606950

Zoom out

Zoom in

1/59

D Tail Servo Frequency

CAUTION: If you do not know the maximum frequency for your selected tail servo,

donotexceed50Hz.Exceedingthemaximumfrequencyforthetailservocanleadto

servo failure.

Forbestperformance,alwaysuseahigh-qualitytailservocapableofatleast270Hz.Dependingon

the selection chosen in Menu Point C,youmaynotbeabletoselectafrequencyabove333Hz.

Status-LED

OFF User Deﬁned (requires PC software)

Purple Solid 50 Hz*

Red Flashing 165Hz

Red Solid 270Hz

Blue Flashing 333Hz

Blue Solid 560Hz

Factory Setting

Attach a servo horn to the tail servo, making sure the tail linkage rod forms a 90° angle with the

servo horn. Adjust the tail linkage rod according to your helicopter instruction manual. For most

helicopters, the tail pitch slider should be centered on the tail shaft. The tail rotor blades will have

a small amount of positive pitch to counter the torque from the main rotor.

IMPORTANT: Menu Point D does not have a time limit.

Press the setup button to save the selection and move to Menu Point E.

E Setting the Tail Servo Endpoints

Adjust the limit of the tail rotor blades to achieve the best throw. The best throw is determined by

either the maximum possible control travel of the tail slider or the maximum allowed tail rotor

blade angle of attack. Make sure the tail rotor blades move in the correct direction (see your

helicopter manual for more information). If the tail rotor blades move in the wrong direction, use

your transmitter to reverse the rudder direction.

To adjust the limits:

1. Move the rudder stick in one direction until the servo reaches the maximum endpoint

without binding. If you move the servo too far, move the rudder stick in the opposite

direction and move the tail pitch slider away from the limit.

2. Release the rudder stick.

3. Once the maximum endpoint is adjusted, do not move the rudder stick.

4. Wait for the Status LED to ﬂash then turn either Solid Red or Solid Blue, depending on

the direction. The servo limit for one direction is saved.

5. Adjust the servo limit in the opposite direction. Move the tail pitch slider to the other

maximum endpoint and release the rudder stick.

6. The Status LED ﬂashes, followed by Solid Purple, indicating that the servo endpoint

adjustment is complete.

IMPORTANT: If the Status LED does not light or lights in an unexpected color, the servo

throw is too small. Move the tail linkage ball farther in toward the center of the servo horn.

7. Press the setup button to save the selection and move to Menu Point F.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Horizon Hobby AR7210BX - BeastX Manual

Product: