606950
5
Zoom out
Zoom in
Previous page
1/59
Next page
EN
5
Specifications
Type: DSM
®
receiver and BEASTX
®
flybarless technology
Channels: 6–9 (8 channels are available, however, Channel 5 is only used as an
internal gain channel for the tail gyro/operating SAFE
®
).
Modulation: DSM2, DSMX
Main Receiver Dimensions: 36mm x 28mm x 13 mm/1.42 in x 1.1 in x .51 in
(LengthxWidthxHeight)
Main Receiver Weight: 0.66 oz (18.6 g)
Voltage Range: 3.5 to 8.5V
Resolution: 2048
Frame Rate: 11ms
Compatibility: All DSM2 and DSMX aircraft transmitters and module systems
SPEKTRUM
AR7210BX Power System Requirements
All flybarless gyro systems require uninterrupted power.
During even a short power interruption/brownout, the flybarless unit must reboot and reinitialize.
CAUTION: If a power interruption/brownout occurs during flight, a crash will occur.
It is your responsibility to ensure the Spektrum AR7210BX has sufficient power
without interruption.
Some of the power system components that affect the ability to properly deliver adequate
power include:
• Theswitchharness,batteryleads,servoleads,regulatorsetc.
• Receiverbatterypack(numberofcells,capacity,celltype,stateofcharge)
• TheESC’sBECcapabilitytodelivercurrenttothereceiverwhenloadisplacedonthe
servos. This is the number one cause of power interruptions in electric helicopters.
The Spektrum AR7210BX has a minimum operational voltage of 3.5 volts. Test the power
system according to these guidelines:
Recommended Power System Test Guidelines
Perform the following test with a voltmeter. The Spektrum Flight Log or Telemetry Modules
(TM1000/TM1100) work well for this test.
Plug the Flight Log into an open channel port in the receiver and, with the system on, load
the servos by applying pressure to the swashplate with your hand for 3 minutes. Monitor
the voltage at the receiver. It is important to load the swashplate for 3 minutes. If a voltage
regulator becomes hot, it can lose its ability to supply current. An alternate method is to power
on the system and rapidly move the control sticks (stir the sticks) with no load on the servos
for 3 minutes. The voltage should remain above 4.8 volts in both cases.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Hobby AR7210BX - BeastX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Hobby AR7210BX - BeastX in the language / languages: English as an attachment in your email.

The manual is 4,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Hobby AR7210BX - BeastX

Horizon Hobby AR7210BX - BeastX User Manual - English - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 64 pages

Horizon Hobby AR7210BX - BeastX User Manual - German - 176 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 57 pages

Horizon Hobby AR7210BX - BeastX User Manual - French - 176 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info