642762
7
Zoom out
Zoom in
Previous page
1/34
Next page
7
28
POWER
Your programmable elliptical trainer is powered by a power supply. The power supply must be
plugged into the power jack, which is located in the front of the machine near the front foot tube.
LEVELING
The elliptical trainer should be level for optimum use. Once you have placed the elliptical trainer
where you intend to use it, raise or lower the adjustable levelers located on the outside of each pedal
arm. Once you have leveled the elliptical trainer, lock the levelers in place by tightening the wing nuts
against the frame.
GETTING STARTED
Core Series
Core Series
ROUTINE MAINTENANCE
WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?
We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important
maintenance step is to simply wipe your perspiration off the trainer after each use.
HOW DO I CLEAN MY ELLIPTICAL TRAINER?
Clean with soap and water cleaners only. Never use solvents on plastic parts.
Cleanliness for your elliptical trainer and its operating environment will keep maintenance problems
and service calls to a minimum. For this reason, it is recommended that the following preventive main-
tenance schedule be followed.
AFTER EACH USE (DAILY)
Unplug the power cord from the wall outlet.
WARNING!
To remove power from the elliptical trainer, the power cord must be disconnected from the wall out-
let.
Wipe down the elliptical trainer with a damp cloth. Never use solvents, as they can cause damage
to the elliptical.
Inspect the power cord. If the power cord is damaged, contact Sears.
Make sure the power cord is not underneath the elliptical trainer or in any other area where it can
become pinched or cut.
EVERY WEEK
Clean underneath the Elliptical, following these steps:
Fold Elliptical to its upright position. Mke sure the Elliptical pedal arms are secure before running.
Unplug the power cord at the wall outlet.
Move the elliptical trainer to a remote location.
Wipe or vacuum any dust particles or other objects that may have accumulated underneath the
Elliptical.
Return the elliptical trainer to its previous position.
EVERY MONTH
Inspect all assembly bolts and pedals on the machine for proper tightness.
TIPS
RE1 ownerís guidev1.1.qxd 10/13/2003 1:53 PM Page 8
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Horizon Fitness Andes 500 CS HRC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Horizon Fitness Andes 500 CS HRC in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Horizon Fitness Andes 500 CS HRC

Horizon Fitness Andes 500 CS HRC Installation Guide - English - 1 pages

Horizon Fitness Andes 500 CS HRC Installation Guide - German - 1 pages

Horizon Fitness Andes 500 CS HRC User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info