Manual Hoover Xarion (page 5 of 66) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

511138

Zoom out

Zoom in

1/66

To access the exhaust lter:

1. Unlock the exhaust lter door by rotating the door along arrow indicated. [19]

2. Remove the lter pack from recess. [20]

3. Gently tap and wash the lter unit. Do not use hot water or detergents. Remove

excess water from the lter and leave to dry fully before reusing. [21]

4. Reassemble lter pack once fully dry and ret to the cleaner.

IMPORTANT: Do not use the product without the lter pack tted.

Cleaning the Airvolution separation unit

This cleaner uses the Airvolution separation system, unique to Hoover. If necessary the

Airvolution separation unit can be removed from the dust container and cleaned.

1. Remove dust container from the cleaner by releasing the container carry handle to

detach the dust container from the main cleaner and pull upward to remove. [15]

2. Place the dust container on a at surface and unclip the clips from either side of the

dust container. [22]

3. Using the dust container handle lift the dust container upper section containing the-

separation unit from the lower section. [23]

4. Use a cloth to remove excessive dust from the separation unit’s surface. [24]

5. Reassemble the dust container upper section. Push clips back to fully close the dust

container. [25]

6. Ret the dust container to the cleaner. To lock in place push the container carry

handle down until the latch connects with the main body of the cleaner. Once cor-

rectly retained the carry handle will sit ush with the top of the cleaner.

Removing a blockage

1. Check if the dust container is full. If so refer to ‘Emptying the dust container.

2. If the dust container is empty but suction is still low:

A. Do the lters need cleaning? If so refer to ‘Cleaning the washable lters’.

B. Check if there is any other blockage in the system - Use a rod or pole to remove

any blockage from the extension tube or exible hose.

C. Check if pre-motor lter is tted and lter door is closed

D. Check if the cyclonic unit needs to be cleaned. Refer to ‘Cleaning the cyclone

unit’

USER CHECKLIST

Should you have a problem with the product, complete this simple user checklist

before calling your local Hoover service.

• Is there a working electricity supply to the cleaner? Please check with another

electrical appliance.

• Is the cyclonic dust container over-filled? Please refer to ‘Cleaner Maintenance’.

• Is the filter blocked? Please refer to ‘Cleaner Maintenance’.

• Is the hose or nozzle blocked? Please refer to ‘Removing a blockage from the

system’.

• Has the cleaner overheated? If so, it will take approximately 30 minutes to auto-

matically reset.

IMPORTANT INFORMATION

Hoover spares and Consumables

Always replace parts with genuine Hoover spares. These are available from your lo-

cal Hoover dealer or direct from Hoover. When ordering parts always quote your model

number.

Consumables:

• Hepa Pre-Motor Filter: S104 - 35600990

• Hepa Exhaust Filter Door: T101 - 35600991

Hoover Service

Should you require service, spares and consumables at any time, please contact your

local Hoover Service Ofce.

Quality

BSI ISO 9001

Hoover’s factories have been independently assessed for quality. Our products are

made using a quality system which meets the requirements of ISO 9001

(*Certain Models Only)

4800xxxx Xarion Pro Standard handle ML ef.indd 3 25/01/2011 10:36:28

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Xarion in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover Xarion Manual

Product: