594414
26
Zoom out
Zoom in
Previous page
1/48
Next page
13
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Vacuum won’t
run
1. Power cord not firmly plugged into outlet. 1. Plug unit in firmly.
2. Blown fuse or tripped breaker. 2. Check fuse or breaker in home. Replace
fuse/reset breaker in home.
3. Thermal Protector activated. 3. Unplug and allow vacuum to cool for 30min.
(This willl reset the thermal protector)
System Check
Indicator has
turned red
or
Vacuum won’t
pick up
or
Low suction
1.Rinsable Filter and/ or Filter
made with HEPA media is dirty.
1. Clean Rinsable Filter and or Filter made
with HEPA media - Pg. 9 and 10.
2. Dirt cup full and/ or clogged. 2. Empty dirt cup - Pg. 9.
3. Broken or worn belt. 3. Replace belt - Pg.12.
4. Brushroll and/ or Hose clogged. 4. Check Hose - Pg. 11. Check Brushroll - Pg.11.
5. Carpet height setting is incorrect. 5. Set Carpet Height Adjustment to appropri-
ate setting for carpet being cleaned - Pg.7.
Cord Rewind
does not work
1. Cord reel does not retract. 1. Call 1-800-944-9200 for the nearest
authorized service representative
Dust escaping
from vacuum
1. Dirt cup full. 1. Empty dirt cup - Pg. 9.
2. Dirt cup not installed correctly. 2. Review Dirt Cup removal & replacement
- Pg. 9.
3. Hose not installed correctly. 3. Review Hose installation - Pg. 7.
4. Rinsable and/ or Filter made with
HEPA media not installed completely.
4. Review Filter Removal and Cleaning - Pg.
9 and 10.
Headlight not
working
1. Bulb burnt out. 1. Replace bulb - Pg. 12.
2. Loose electrical wires. 2. Call 1-800-944-9200 for nearest autho-
rized Hoover
®
dealer.
Vacuum is
difficult to push
or won’t move
forward
1. Carpet height setting is
incorrect.
1. Set Carpet Height Adjustment knob to
appropriate setting for carpet being cleaned
- Pg. 7.
Powered Hand
Tool brushroll
won’t turn
1. Too much pressure being applied to
tool.
1. Continue using tool applying light pres-
sure.
2. Blockage. 2. Remove blockage - Pg. 11
3. Low vacuum suction. 3. Check items under “Vacuum won’t pick or
Low suction.”
Smoky/burning
smell detected
1. Belt broken or stretched.
1. Replace brushroll belt - Pg. 12.
2. Brushroll is clogged. 2. Clear/ remove debris from brushroll - Pg. 11.
5. TROUBLESHOOTING
If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the
checklist below.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take
it to a service center prior to continuing use.
WARNING
! !
To reduce risk of personal injury - Unplug vacuum before servicing.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover WindTunnel 2 Rewind Pet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover WindTunnel 2 Rewind Pet in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info