594414
23
Zoom out
Zoom in
Previous page
1/48
Next page
12
4.21
4.22
4.23
Removing Lens
Press Handle Release Pedal and place handle in
low position.
4.21 Using a Phillips screwdriver, remove (2)
screws as shown and lift off lens.
Installing Bulb
4.22 Pull old bulb straight out of socket. Push new
bulb straight into socket until locked in place.
Excessive force is not required.
Twisting or turning bulb not required.
Replacing Lens
4.23 Reposition lens and secure with screws.
What to Buy:
Headlight
Additional bulbs may
be ordered at Hoover.
com or call 1-800-
944-9200. Ask for
Hoover
®
Part No.
27313107.
HEADLIGHT: How to Replace
WARNING
! !
To reduce the risk of electrical shock - Unplug
before cleaning or servicing.
(available on select models only)
BELT
The belt is located under the cover of the vacuum
and should be checked from time to time to be sure
it is in good condition.
When To Replace
How To Replace
4.24 Depress handle release pedal and place han-
dle in low position. Lay vacuum down in hortizontal
position with nozzle facing down as in Fig. 4.14.
Remove (4) screws on nozzle lid.
4.25 Pivot off nozzle cover.
4.26 Remove old and worn belt. With lettering on
outside of belt, slide new belt over motor shaft
(metal rod) (A).
Push other end of belt through belt guide and slip
around area of brushroll without bristles (B).
With belt in place, pull and slide brushroll into nozzle
making sure that the brushroll end caps are in the
correct orientation.
4.27 Reposition nozzle plate cover and insert (4)
screws.
Replace belt if it is stretched, cut or broken.
To check the belt, refer to Fig. 4.24 - 4.26.
CAUTION
! !
To reduce the risk of injury from moving parts
- Unplug before servicing.
Actual model may vary from images shown.
What to Buy: Belt
Use only genuine HOOVER
®
belts with your
vacuum. Ask for Stretch Belt - HOOVER
®
part
No. 562932001 or AH20080 (2 Belt pack).
IMPORTANT
Rotate brushroll manually to make sure belt is
not twisted.
LUBRICATION:
The motor and brushroll are equipped with bearings which contain sufficient lubrication for their lifetime. The
addition of lubricant could cause damage. Do not add lubricant to motor or brushroll.
4.24
4.25
4.26 4.27
B A
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover WindTunnel 2 Rewind Pet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover WindTunnel 2 Rewind Pet in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info