Manual Hoover VTH 980 NA1TX (page 8 of 128) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

594305

Zoom out

Zoom in

1/128

EN 8

DRAIN HOSE KIT: FITTING INSTRUCTIONS

WARNING! Switch off and remove the

tumble dryer plug from the electricity supply

before carrying out any work.

Fit he Kit s Follows:t a

1 . U n s c r e w a n d

remove the 3 screws,

at the

machine, retaining the

worktop trim.

2. Remove the rear

worktop trim and the

worktop surface by

carefully sliding it

towards the rear of the

machine.

container is situated at

the right-hand side of

the machine (viewed

from the rear). A grey

hose connects to the

bridge above the water

container. Using pliers,

r e m ove t h e p i p e

retaining clip from the

bridge.

4. Pull the hose off the

bridge connection.

5. Attach the hose from

the kit, using the

connector and pipe

clips supplied, to the

hose removed from the

bridge connection.

rear of the

The waste water

6. Take off the water

container cover from

the rear of the machine

by removing the two

screws and unclipping

the cover.

7. Break off the tab on

the side of the cover

and replace the cover

on the machine, refit

the screws. You should

now have revealed a

hole in the back of the

cabinet next to the

Cover.

8. Feed the drain hose

through the hole in the

cabinet.

9. Locate the grey pipe

in the cutout of the tray

and secure the pipe

assembly to the bridge

with the plastic tie.

10. Carefully slide the

worktop back into

position ensuring that

the hose is not trapped

a n d r e p l a c e t h e

worktop rear trim with

the 3 screws.

11. Connect the new

drain hose to the waste

water pipe. Make sure

that the new hose does

not kink when pushing

the tumble dryer into

position. Ensure that

the guidelines, as

shown, are followed

when routing the new

external hose.

12. Connect to the

m a i n s e l e c t r i c i t y

supply.

13. After emptying the

waste water container

switch the machine ON

(and press the 'START'

button on electronic

models) to commence

w i t h t h e d r y i n g

program.

To avoid having to empty the water container

after each drying cycle, the water normally

collected during the drying cycle can be

discharged directly to a waste water drain pipe

(the same drainage system as household

sinks).Water Bye-Laws prohibit connection to

a surface water drain. The waste water drain

pipe system should be located adjacent to the

tumble dryer.

Ÿ 1 hose, 1 straight

hose connector, 1 pipe clip and 1 plastic tie.

The kit is composed:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover VTH 980 NA1TX in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 8,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover VTH 980 NA1TX Manual

Product: