510511
20
Zoom out
Zoom in
Previous page
1/41
Next page
38
EN
BUTTONS INDICATOR LIGHT
These light up when the
relevant buttons are
pressed.
If an option is selected that
is not compatible with the
selected programme then
the light on the button first
flashes and then goes off.
PROGRAMME SELECTOR WITH
OFF POSITION
WHEN THE PROGRAMME
SELECTOR IS TURNED THE
DISPLAY LIGHTS UP TO
SHOW THE SETTINGS FOR
THE PROGRAMME
SELECTED. FOR ENERGY
SAVING, AT THE END OF THE
CYCLE OR WITH AN
INACTIVITY PERIOD, THE
DISPLAY LEVEL CONTRAST
WILL DECREASE.
N.B. TO SWITCH THE
MACHINE OFF, TURN THE
PROGRAMME SELECTOR TO
THE “OFF” POSITION.
Press the "Start/Pause"
button to start the selected
cycle.
The programme carries out
with the programme
selector stationary on the
selected programme till
cycle ends.
Switch off the washing
machine by turning the
selector to OFF.
NO
TE:
THE PROGRAMME
SELECTOR MUST BE
RETURN TO THE OFF
POSITION AT THE END
OF EACH CYCLE OR
WHEN STARTING A
SUBSEQUENT WASH
CYCLE PRIOR TO THE
NEXT PROGRAMME
BEING SELECTED AND
STARTED.
39
M
FR
IT
LES VOYANTS DES TOUCHES
Ces témoins s’allument
lorsque qu’une option est
choisie
Si une option est
incompatible avec le
programme, le témoin de
l’option clignotera puis
s’éteindra.
MANETTE DES PROGRAMMES
DE LAVAGE AVEC OFF
LORSQUE LE SELECTEUR EST
POSITIONNE SUR UN
PROGRAMME, L’ECRAN
MONTRE LES DETAILS DU
CYCLE CHOISI. EN FIN DE
CYCLE OU LORSQUE LA
MACHINE EST RESTEE
INACTIVE, LA LUMINOSITE DE
L’ECRAN DIMINUE
PROGRESSIVEMENT DANS UN
SOUCI D’ECONOMIES
D’ENERGIE.
N.B. AFIN D’ETEINDRE
COMPLETEMENT LA
MACHINE, PLACER LE
SELECTEUR SUR " OFF "
Appuyez sur la touche
"MARCHE/PAUSE" pour
commencer le cycle.
Le cycle de lavage se
réalisera avec la manette
des programmes arrêtée sur
le programme sélectionné
jusqu'à la fin de celui-ci.
A la fin du lavage,mettez la
machine à l' arrêt en
tournant la manette
programmes sur la position
"OFF"
NOTE: LORS DE LA MISE EN
MARCHE DU CYCLE DE
LAVAGE SUIVANT, LE
SELECTEUR DE
PROGRAMME DOIT ETRE
REMIS EN POSITION OFF
AVANT DE SELECTIONNER
ET DE LANCER LE
PROGRAMME SUIVANT.
SPIE TASTI
Si accendono quando i
rispettivi tasti vengono
premuti.
Nel caso in cui sia stata
selezionata un’ opzione non
compatibile con il
programma scelto la luce sul
pulsante prima lampeggia e
dopo si spegne.
MANOPOLA PROGRAMMI
CON OFF
RUOTANDO LA MANOPOLA
IL DISPLAY SI ILLUMINA
VISUALIZZANDO I
PARAMETRI DEL
PROGRAMMA SCELTO.
A FINE CICLO O DOPO UN
PERIODO DI INATTIVITÀ, LA
LUMINOSITÀ DEL DISPLAY
DIMINUISCE PER UN
RISPARMIO ENERGETICO.
N.B. PER SPEGNERE LA
MACCHINA RUOTARE LA
MANOPOLA PROGRAMMI
SULLA POSIZIONE “OFF”.
Premere il tasto "Avvio/Pausa"
per iniziare il ciclo di lavaggio
Il ciclo di lavaggio avverrà
con la manopola programmi
ferma sul programma
selezionato sino alla fine del
lavaggio.
A fine ciclo spegnere la
lavabiancheria portando la
manopola programmi in
posizione "OFF".
NOTA:
LA MANOPOLA
PROGRAMMI DEVE
ESSERE SEMPRE PORTATA
IN POSIZIONE DI OFF
ALLA FINE DI UN
LAVAGGIO E PRIMA DI
SELEZIONARNE UNO
NUOVO.
DE
TASTENANZEIGE
Sie leuchten auf, sobald die
entsprechenden Tasten
gedrückt werden.
Falls eine Option gewählt
wird, die mit dem
eingestellten Programm nicht
kompatibel ist, blinkt die
Anzeige auf der Taste zuerst,
dann erlischt sie.
PROGRAMMWAHLSCHALTER MIT
OFF
DURCH DREHEN AM
WAHLSCHALTER LEUCHTET
DAS DISPLAY AUF UND ZEIGT
DIE VOREINSTELLUNGEN DES
GEWÄHLTEN PROGRAMMS.
AM ENDE DES PROGRAMMS
ODER NACH EINER
LÄNGEREN BETRIEBSPAUSE
WIRD DIE LEUCHTKRAFT DES
DISPLAYS HERUNTERGESETZT,
UM ENERGIE ZU SPAREN.
HINWEIS: UM DAS GERÄT
AUSZUSCHALTEN,
PROGRAMMWAHLSCHALTER
AUF OFF STELLEN.
Drücken Sie die START-Taste,
um das Programm zu starten.
Während des Waschgangs
bleibt der
Programmwahlschalter bis
zum Ende des Programmes
auf dem gewählten
Programm stehen.
Am Ende des
Waschprogrammes schalten
Sie das Gerät ab durch
Drehen des Wahlschalters auf
die Position OFF.
HINWEIS:
DREHEN SIE IMMER NACH
BEENDIGUNG DES
PROGRAMMS, UND
BEVOR SIE EIN NEUES
PROGRAMM EINSTELLEN,
DEN
PROGRAMMWAHLSCHALT
ER AUF DIE POSITION AUS.
N
NL
INDICATIELAMPJES BIJ DE
KNOPPEN
Deze lampjes gaan branden
als de toets wordt ingedrukt.
Als er een keuze wordt
gemaakt welke niet kan
worden ingeschakeld, gaat
het lampje knipperen en
vervolgens weer uit.
PROGRAMMAKNOP WASSEN
MET OFF
WANNEER ER AAN DE
PROGRAMMAKEUZE KNOP
WORDT GEDRAAID ZAL HET
DISPLAY GAAN BRANDEN OM
DE INSTELLINGEN VAN HET
GEKOZEN PROGRAMMA TE
LATEN ZIEN.VOOR
ENERGIEBESPARING, AAN HET
EINDE VAN HET PROGRAMMA
OF TIJDENS INACTIVITEIT, ZAL
HET DISPLAY CONTAST
VERMINDEREN
OM DE MACHINE UIT TE
SCHAKELEN DRAAID U DE
PROGRAMMAKEUZEKNOP
NAAR DE “UIT”POSITIE.
Druk op de "Start/Pauze"-knop
om het geselecteerde
programma te starten.
Het programma draait met
de programmaknop
gepositioneerd op het
gekozen programma totdat
het programma eindigt.
Schakel de machine bij het
einde van het programma uit
door de knop in de “OFF”
positie te draaien.
LET
OP:
ZET NA AFLOOP VAN EEN
WASCYCLUS DE
PROGRAMMAKNOP
ALTIJD EERST WEER OP UIT
(OFF) VOORDAT U EEN
VERVOLG-PROGRAMMA
OF EEN NIEUW
PROGRAMMA INSTELT EN
START.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover VT 814 D21 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover VT 814 D21 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info