594433

Hoover Turbo Scrub Carpet Cleaner Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
10
BEFORE YOU BEGIN CLEANING
1. Vacuum thoroughly - For carpet, use a HOOVER
®
vacuum cleaner with an agitator for best results.
Vacuum upholstery with a vacuum cleaner with
cleaning tool attachments. Use a crevice tool to
reach into tufts and folds. Do not use the carpet
cleaner as a dry vacuum cleaner.
2. For upholstery, check cleaning code - Use your
HOOVER
®
carpet washer only if the upholstery
fabric is marked with a “W” (for “wet” clean) or “S/W”
(for “solvent/dry” or “wet” clean). Do not clean fabric
marked “S” (“solvent/dry” clean only). If your
upholstery does not have a code, seek professional
assistance.
3. Test for colorfastness - Wet a white absorbent
cloth with the solution. In a small, hidden area,
gently rub the surface with the dampened cloth.
Wait ten minutes and check for color removal or
bleed with white paper towel or cloth. If surface has
more than one color, check all colors.
4. When cleaning entire floor, move furniture out of
area to be cleaned (may not be necessary if only
high traffic areas are to be cleaned). For furniture
too heavy to move, place aluminum foil or wax
paper under legs. This will prevent wood finishes
from staining carpet. Pin up furniture skirts and
draperies.
5. Pretreat spots and heavy traffic areas with an
appropriate Hoover Cleaning Solutions, see
“Cleaning Solutions” section. Follow Directions on
bottle.
*Available at additional cost if not included with your
model.
6. To prevent staining, use plastic or aluminum foil
to protect wood or metal surfaces from possible
water spray.
7. To avoid wetting and possible damage to wood
floors underneath area rugs/carpet, either move area
rugs/ carpet to a non-wood hard floor surface or
place waterproof material (e.g. plastic) underneath
them before cleaning.
HOW TO CLEAN
Actual model may vary from images shown.
WASHING CARPET
Read “Before You Begin Cleaning” instructions.
1. Fill Clean Water Tank according to instructions (Pg. 8).
2. Fill solution tank with Hoover® solution according to
instructions (Pg. 8).
3. Dry hands and plug cord into a properly grounded outlet.
Do not clean over floor electrical outlets.
CAUTION
! !
5. Turn cleaner ON.
6. Squeeze trigger to apply cleaning solution and slowly push
cleaner forward (equals one wet stroke) (Fig. 29).
7. Continue to squeeze trigger and slowly pull cleaner back
toward you (second wet stroke).
Step 1
NOTE: To avoid walking on damp carpet, start at the end of the
room farthest from the door or path to sink where tanks will be
emptied and filled.
4. Step on handle release pedal and lower handle to operating
position.
29
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover Turbo Scrub Carpet Cleaner at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Turbo Scrub Carpet Cleaner in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info