595371

Hoover SCB1500 Steamjet Cylinder Manual

4
Zoom out
Zoom in
Previous page
1/5
Next page
2
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1. Attach the hose to the main body of the cleaner. [2]
2. Attach the extension tube to the hose handle. Connect the other extension tubes
together. [3]
3. Attach the oor head connector to the oor head. Rotate the connector in place. [4]
4. Attach the extension tubes to the connector until it clicks in place. [5]
5. Ensure the handle safety latch is locked. [6]
NOTE: To remove the extension tube from the handle or the oor head from the tubes,
press the release latch and pull apart.
USING YOUR CLEANER
BEFORE YOU BEGIN CLEANING
1. Remove the clean water lid by pushing down and turning anti-clockwise. [7]
2. Fill the measuring jug no more than the Max ll line.
3. Insert the funnel into the water tank and ll the unit with water. [8]
4. Replace the lid by pushing down and turning clockwise.
5. Ensure the handle safety latch is locked. [6]
IMPORTANT: Always unplug the cleaner and press the steam release trigger to
release any remaining steam pressure before adding water.
Steam cleaning hard oors
1. Ensure the oor head is connected to the extension tube.
2. Plug the steam cleaner into the main power and switch on. The red ON light will
illuminate. [9]
3. After a few minutes the green steam ready light will illuminate indicating the cleaner
is ready for use. [10]
4. Release the steam handle safety latch. [11]
5. To produce steam press the Steam Trigger Button. [12]
6. If necessary adjust the variable steam dial to adjust pressure. [13]
7. Move the cleaner slowly backwards and forwards paying particular attention to high
trafc areas.
Refreshing carpets
IMPORTANT: Always unplug the cleaner and press the steam release trigger to
release any remaining steam pressure before adding water or changing a textile
pad or accessory tool .
1. Place the oor head onto the oor cloth. [14]
2. Lift the levers on either side of the oor head to secure each end of the oor cloth
in place. [15]
3. Repeat steps 2-7 as detailed above.
ACCESSORIES
1. Ensure the handle safety latch is locked. [6]
2. To attach the concentration nozzle push onto the handle/extension tube until it
clicks in place. [16]
3. Push the desired small tool onto the concentration tool aligning the arrows. [17]
4. Twist clockwise to secure in place. [17]
5. Plug the steam cleaner into the main power and switch on. The red ON light will
illuminate. [9]
6. After a few seconds the green Steam Ready light will illuminate indicating the
cleaner is ready for use. [10]
7. Release the steam handle safety latch. [11]
8. To produce steam press the Steam Trigger Button. [12]
9. If necessary adjust the variable steam dial to adjust pressure. [13]
NOTE: The concentration tool must be attached before tting any other small tools.
Concentration Nozzle Use on heavily soiled areas such as showers, kitchens. [18]
Window Squeegee Use on windows and mirrors for a smear free clean. [19]
Upholstery Tool Use the upholstery cloth over the window tool for use on sofas
and chair fabrics. [20]
Large Round Brush Use on stubborn grease and grime. [21]
Metal Brush For oven grills and racks. [22]
Angled Nozzle For hard to reach areas such as taps etc. [23]
Scraper tool Ideal for dried residue in ovens or defrosting freezers. [24]
IMPORTANT: Always unplug the cleaner when adding water, changing a textile pad
or accessory tool .
GB
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover SCB1500 Steamjet Cylinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover SCB1500 Steamjet Cylinder in the language / languages: English as an attachment in your email.

The manual is 2,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info