511260
4
Zoom out
Zoom in
Previous page
1/54
Next page
2
USING YOUR CLEANER
1. Extract power cord and plug it into the power supply. Do not pull the cord beyond the
red marker. [5]
2. Adjust the telescopic tube to the desired height by moving the telescopic release
button up and raise or lower the handle to the most comfortable cleaning position. [6]
3. Select carpet care control height by pressing the pedal in the nozzle. [7]
Hard Floor – Brushes are lowered to protect the oor.
Carpet – Brushes are raised for the deepest clean.
4. Switch the cleaner on by pressing the On/Off Button on the cleaner main body. [8]
5. Adjust the power control regulator to the desired level.* [9]
6. Adjust the suction regulator on the handle to the desired level. [10]
7. Switch off at the end of use by pressing the On/Off Button. Unplug and press the cord
rewind button to wind the power cord back into the cleaner. [11]
8. To store your cleaner adjust telescopic tube to the lowest height setting and park the
nozzle in the park position on the cleaner main body. [12]
ACCESSORIES
All accessories can be tted to the end of the handle or the end of the telescopic tube.
3 in 1 toolCombines several functions in one. The 3 in 1 tool can be stored neatly un-
derneath the hose handle.
Crevice Tool – For corners and hard to reach areas. [13]
Furniture Nozzle – For soft furniture and fabrics [14]
Dusting Brush – For bookshelves, frames, keyboards and other delicate areas. To ex-
tend thebrushes push the button on the body of the tool. [15]
Parquet Nozzle* – For parquet oors and other delicate oors.
Grand Turbo Nozzle* – Use the turbo nozzle for deep cleaning on carpets.
Pet Hair Remover Mini Turbo Nozzle* - Use the mini turbo nozzle on stairs or for deep-
cleaningon textile surfaces and other hard to clean areas. Particularly suitable for pet hairs
removal.
Allergen Remover Mini Turbo Nozzle* – Use the mini turbo nozzle on stairs or for deep-
cleaning on textile surfaces and other hard to clean areas. Particularly suitable for allergen
removal.
IMPORTANT : Do not use the turbo and mini turbo nozzles on rugs with long fringes,
animal hides and carpet pile deeper than 15mm. Do not keep the nozzle stationary while
the brush is rotating.
CLEANER MAINTENANCE
Emptying the Dust Container
When the dust reaches the max level indicator in the container empty the dust container.
IMPORTANT : To maintain optimum performance do not allow the dust to sit higher than
the max level.
1. Release the container by sliding the bin release button towards the rear of the cleaner.
[16] Lift the dust container from the cleaner main body.
2. Hold the dust container over a bin with one hand and press the bin container door
open trigger. [17]
3. Close the dust container door and ret to the cleaner main body.
Cleaning the washable lters
The cleaner is tted with a blue lter pack. To maintain optimum cleaning performance
regularly remove the the lters and tap against the side of the bin to release dust. The lters
should be washed every 5 cassette empties or when the lter has excessive dust level.
IMPORTANT: All bagless cleaners require regular lter cleaning. Failure to clean
your lters may result in air blockage, overheating and product failure. This may
invalidate your guarantee.
IMPORTANT: Regularly check and maintain the lters.
IMPORTANT: Always ensure the lter pack is fully dry before use.
To access the lter:
1. Release the container by sliding the bin release button towards the rear of the cleaner.
[16] Lift the dust container from the cleaner main body.
2. Hold the bin with one hand and with the other hand rotate the bin handle anti clockwise
to release from the bin container. [18]
3. Remove the blue lter unit located in the bin handle. [19]
4. Separate the foam lter from the lter pack. [20]
5. Gently tap and wash the grey foam lter using warm water. Do not use hot water or
detergents. Remove excess water from the lter and leave to dry fully before re-using.
[21]
6. Gently tap and wash the blue lter unit. Do not use hot water or detergents. Remove
excess water from the lter and leave to dry fully before re-using. [21]
7. Reassemble to lter pack once fully dry and ret to the cleaner.
IMPORTANT: Do not use the product without the lter pack tted.
To access the exhaust lter:
1. Unclip the exhaust lter from the rear of the cleaner. [22]
2. Gently tap and wash the grey foam lter using warm water. Do not use hot water or
detergents. Remove excess water from the lter and leave to dry fully before re-using.
[22]
GB
(*Certain models only)
rosie 48000686 -01- rush ML IM.indd 2 12/01/2011 00:17:19
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover Rush at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover Rush in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info