594388
7
Zoom out
Zoom in
Previous page
1/11
Next page
- 7 -
If your cleaner is not picking up efciently, the belt or
brushes (or both) may need replacing, but rst make sure
you have:
Emptied the dust container
Cleaned lters
Checked for blockages
Remove hood
Prise off the carpet care control selector.
Remove hood screws A and B.
Lift off hood.
Remove brush assembly
Inspect belt for signs of wear.
To remove, pull brush cleaner assembly upwards out of
cleaner housing. Remove belt from motor spindle then
from brush assembly.
Replace belt
Loop the new belt around the motor spindle then
around the brush channel.
Ret brush assembly
Hold the brush assembly
and stretch the belt until
brush mountings slot down
into the cleaner housing.
Rotate the brush to ensure
free movement of the belt.
Ret hood
Ret hood, ensuring the
lugs along the front of hood
are located in the slots
along the front edge of
baseplate.
Secure hood, using screws
A and B.
Ret carpet care control
selector
Ensure the raised face (T)
is towards the front of the
cleaner.
4
5
3
1
2
IMPORTANT: Switch cleaner off and
remove plug from electricity supply
before checking the brushes or removing
hood.
1
2
CHANGING BELT OR BRUSHES
This cleaner is unlikely to become blocked, except by
over lling of the dust bag or accidentally picking up large
solid objects. Clearing a blockage is simple.
If cleaning tools were in
use, check cleaning tool and
extension tube rst. Next
check hose handgrip; to
remove grip ribbed ring as
shown, turn in direction of
arrow and ease apart.
To check the hose, stretch it
to full length and switch on
the cleaner; the suction will
dislodge most obstructions. If
this is unsuccessful, switch off
and unplug the cleaner. Remove
the hose by turning it anti-
clockwise as shown. Detach
hose and remove blockage.
For blockages in cleaner base:
1. Turn the cleaner over and
check that the brushes are
free to rotate.
2. Check for a blockage in
hose socket. Use a piece of
wire or a blunt exible rod
to remove any obstructions.
CLEARING A BLOCKAGE
IMPORTANT: Switch the cleaner
off and remove the plug from the
electricity supply before dismantling
cleaner.
!
- 7 -
* Certain models only
Removing a blockage from the
Pet Hair & Allergen Remover*
(* Certain models only)
Open clip and lift cover to remove
blockage.
B
A
48000164 - 3 Purepower UK IM.indd 7 18/11/2010 11:08:20
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover PUREPOWER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover PUREPOWER in the language / languages: English as an attachment in your email.

The manual is 2,2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Hoover PUREPOWER

Hoover PUREPOWER User Manual - German - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info