Manual Hoover OH100 M7 VARIO (page 7 of 120) (English)

513706

Zoom out

Zoom in

1/120

Note: we recommend you keep the transit bracket and

screws to protect the machine for future transit.

The Manufacturers will not be responsible for any

damage to the machine caused by not following the

instructions relating to releasing the transit protection.

The user is responsible for all installation costs.

Connecting the fill hose

This machine has an inlet hose with 19 mm (3/4”) threaded ferrules fitted to the

ends to attach between the threaded connector on the appliance and the water

supply.

Only use the new hose supplied to connect the machine and ensure that the

sealing washers are in place inside the hose connectors.

Do not re-use old hoses which are attached to existing installations.

Do not over-tighten the connections. Hand tight is sufficient.

Do not trap or kink the hoses.

Connect the straight end of the hose to the stop taps.

Acqua-stop (fitted to certain models)

The fill hose supplied with this machine has a double skin

and incorporates a water valve (A). If the inner hose

bursts the valve will automatically shut off the water

supply to prevent flooding. The indicator turns red (B).

Should this happen, turn off the water supply immediately

and have a new fill hose fitted by Hoover Service.

If the inlet hose’s connection point is changed, check that

the 3/4” threaded ferrule on the inlet hose is firmly

attached to the electrovalve connector.

WARNING: DO NOT LEAVE THE PACKAGING IN THE

REACH OF CHILDREN AS IT IS A POTENTIAL SOURCE

OF DANGER.

english final.qxd 23/12/2003 12:00 Page 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover OH100 M7 VARIO in the language / languages: English as an attachment in your email.

The manual is 3,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover OH100 M7 VARIO Manual

Product: