594516
12
Zoom out
Zoom in
Previous page
1/16
Next page
Troubleshooting
FAULT CAUSE SOLUTION
1.- No programme works
• The appliance is not plugged
in.
• The general switch is discon-
nected.
• There is no electricity.
• The fuses in the electric insta-
llation are damaged.
• The door is open.
• Plug it in.
• Activate the general switch.
• Check.
• Check.
• Close the door.
2.- The appliance does not
load water
• See causes for 1.
• The tap is turned off.
• Check.
• Turn on the tap.
3.- The water does not drain
• The filter is clogged.
• The outlet pipe is bent.
• Check the filter.
• Straighten the outlet pipe.
4.- The spin function does not
work
• The washing machine has not
yet drained the water.
• The “Spin Exclusion” option is
activated.
• Wait a few minutes for the was-
hing machine to drain.
• Enable the spin option.
5.- Strong vibrations during
spin cycle
• The washing machine is not
correctly levelled.
• The anchoring device for trans-
port has not been removed.
• The wash load is not evenly
distributed.
• Adjust the feet.
• Remove the transport support.
• Distribute it evenly.
6.- The high-speed spin does
not work
• The wash load is not evenly
distributed within the drum.
• Distribute the wash load evenly
in the drum.
If the problem or malfunctioning persists, disconnect the
machine, turn off the tap and do not try to repair.
For all repairs contact an Official Technical Assistance centre
(consult the European guarantee sheet) and always insist on the
use of original parts. Failure to do so may compromise the safety
of your machine.
When contacting a Technical Assistance Centre always refer to
the model (see also control panel) and the registration and serial
numbers indicated on the plate at the bottom front of the
machine behind the plinth panel or on the guarantee certificate.
That is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient
service.
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover HNT5146 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HNT5146 in the language / languages: English as an attachment in your email.

The manual is 2,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info