Manual Hoover HNL71663D (page 8 of 32) (English)

594502

Zoom out

Zoom in

1/32

Connecting to the cold water

supply

Only one hose is required to install this machine to a cold

water supply.

Cold fill is an energy efficient system. Only the water required

to wash the laundry is heated. There is no loss of heat in the

pipeline from the hot water tank or the boiler.

If your previous machine installation was hot and cold fill

ensure that the hot tap is firmly closed to prevent leakage.

This machine has an inlet hose with a 19mm (3/4") threaded

ferrule fitted to the end, to attach between the threaded

connector on the appliance and the water supply.

Only use the new hose supplied to connect the machine and

ensure that the sealing washers are in place inside the hose

connectors.

Do not re-use old hoses which are attached to existing

installations.

Do not over-tighten the connections. Hand tight is sufficient.

Do not trap or kink the hose.

1. Connect the elbow end of the hose provided to the

threaded inlet on the back of the machine.

Grey pipe to the white threaded inlet on the machine.

2. Hand tighten the connector.

3. Connect the straight ends of the pipes to the water

supply; ensure that there are no kinks.

4. Turn on the water supply and check for leaks. If there is a

leak, turn off the water supply, disconnect the hose and

check the sealing washers are in place. Refit the hose and

turn on the water supply.

This Appliance

must be

connected to a

COLD WATER

supply only.

40004968.qxd 23/05/2007 13:40 Page 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HNL71663D in the language / languages: English as an attachment in your email.

The manual is 0,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Hoover HNL71663D Manual

Product: