594695
39
Zoom out
Zoom in
Previous page
1/46
Next page
Codice Problema Causa
E-1
La temperatura del sensore non raggiunge 40° se il
forno rimane in funzione per 2 minuti.
E-2
Mancanza di acqua.
Quando la temperatura del sensore raggiunge
135°, il forno smette di funzionare. Viene emesso
due volte il segnale acustico. Se non viene aggiunta
acqua, l’indicazione rimane visibile sul display; se
viene aggiunta acqua, sul display viene visualizzato
il tempo rimanente. Premere
” per riprendere la cottura.
Diversamente, il forno rimane in attesa.
Nota: durante la cottura, non si deve aprire lo sportello del forno. Se lo sportello viene aperto,
il forno si spegne e la ventola continua a funzionare per 3 minuti. Chiudere lo sportello e
premere “ ” per riprendere la cottura.
12. Cottura multisessione
Per la cottura possono essere impostate al massimo due sessioni. Con la cottura
multisessione, se una delle modalità selezionate è lo scongelamento, tale modalità verrà
assegnata alla prima sessione.
Esempio: scongelare del cibo in 5 minuti e quindi cuocere ad una potenza dell’80% per 7
minuti.
1) Premere due volte “ ”; sul display viene visualizzato “dEF2”.
2) Ruotare “ ” per selezionare il tempo di scongelamento finché non viene visualizzato
“5:00”.
3) Premere una volta “
”; sul display viene visualizzato “P100”.
4) Premere
” ancora una volta o ruotare “ ” per selezionare 80%.
5) Premere “ ” per confermare; sul display viene visualizzato “P80”.
6) Ruotare “ ” per regolare il tempo di cottura finché sul display del forno non viene
visualizzato “7:00”.
7) Premere “ ” per avviare la cottura. Viene emesso un primo segnale
acustico per indicare l’inizio della prima sessione, dopodiché inizierà il conto alla rovescia
del tempo impostato per lo scongelamento, trascorso il quale verrà emesso un secondo
segnale acustico che precederà l’avvio della seconda sessione di cottura. Al termine
della cottura, verranno emessi cinque segnali acustici.
IT
11. Funzione di protezione dal vapore
38
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Hoover HMG2595 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Hoover HMG2595 in the language / languages: English, Italian as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info